The XY2-CH emergncy stop rope pull switch (also known as a grab wire switch) is ideal for applications such as conveyor systems, packaging, textiles, transfer machines, presses, woodworking equipment, paint lines and test laboratories.
For machine tools, conveyers & handling applications
Recommended distance between cable supports: 5m
Built-in turnbuckle accessory
Pushbutton reset
Water and dust tight enclosure
Surface mount
Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.
UL Listed file number: E164353 CCN NKCR. CSA certified file number: LR44087 class 3211 03. CE marked.
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 2NC contact configuration. It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC. The current rating of the switch is 3A and 270mA for AC and DC respectively. This switch has a rope span of 15m and the mounting orientation is straight.
Note:
Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.
Size of cable entry is PG13.5
For machine tools, conveyers and handling applications
Recommended distance between cable supports is 5m
Built-in turnbuckle accessory
Pushbutton reset
Water and dust tight enclosure
Surface mount
Conveyor systems
Packaging
Textiles
Transfer machines
Presses
Woodworking equipment
Paint lines
Test laboratories
UL approved
CCN certified
CSA certified
CE certified
IP65 rated
Kenmerk | Waarde |
---|---|
Range | Preventa |
Series | XY2-CH |
Reset Button | Yes |
Normal State Configuration | 2NC |
Mounting Orientation | Straight |
Maximum Rope Span | 15m |
Maximum Current | 3 A ac, 270 mA dc |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 250V |
Number of Cable Entries | 1 |
Conduit Entry | PG13.5 |
Size of Cable Entries | PG13.5 |
Dimensions | 68 x 201 x 95 mm |
E-Stop Button | No |
Maximum Operating Temperature | +70°C |
IP Rating | IP65 |
Length | 68mm |
Minimum Operating Temperature | -25°C |
Width | 201mm |
Depth | 95mm |