GWD Cable Switch, Straight, 2 x 100m, 2 x 2NO/2NC

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

GWD Series, Double Grab Wire

Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines
Typical applications:- conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Double grabwire switches are a convenient way of installing two rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2 N/C + 2 N/O (each side)
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope setting kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304

Note

To comply with safety standards, a switch unit should be fitted at each end of the grab wire to afford system and operator protection.
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757

//media.rs-online.com/t_line/L5117175-01.jpg
Specificaties
Kenmerk Waarde
Series GWD
Reset Button Yes
Pole Configuration 2 x 4P
Normal State Configuration 2 x 2NO/2NC
Mounting Orientation Straight
Maximum Rope Span 2 x 100m
Maximum Current 6 A
Maximum AC Voltage 250V
Maximum DC Voltage 24V
Housing Material Steel
Conduit Entry M20
Dimensions 285 x 94 x 110 mm
Width 94mm
Length 285mm
E-Stop Button No
IP Rating IP65
Depth 110mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
495,21
(excl. BTW)
599,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
495,21 €
Related Products
The Telemecanique sensors XY2CE is 240VAC voltage wire ...
Description:
The Telemecanique sensors XY2CE is 240VAC voltage wire switch. It has E-stop rope pull switch on right side-2NC+2NO with yellow pilot light, 230V-boot. • Contact operation slow break• Cover material is stainless steel• Housing material is Zamak• Maximum rope span ...
Telemecanique OsiSense XCKW series wireless and battery-less limit ...
Description:
Telemecanique OsiSense XCKW series wireless and battery-less limit switches. The XCKW range provides simplified machine communication where wiring or wire maintenance is not physically or economically possible. The XCKW series limit switches are compatible with various receivers from Telemecanique that ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...
XCS-DM coded magnetic safety switches are designed for ...
Description:
XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect ...