XY2CE Grab Wire Switch with E-Stop, 70m, 2NC

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Telemecanique XY2CE EX ATEX Emergency Stop Rope Pull Switches

Telemecanique XY2CE EX ATEX emergency stop rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.

Features and Benefits

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m

Specificaties
Kenmerk Waarde
Range Preventa XY2
Series XY2CE
Reset Button Yes
Pole Configuration DPST
Normal State Configuration 2NC
Indicator Type Rope Tension
Maximum Rope Span 70m
Maximum Current 3 A ac, 270 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Housing Material Stainless Steel (Cover), Zamak (Body)
Number of Cable Entries 1 (Cable Gland), 2 (Blanking Plug)
Size of Cable Entries ISO M20
IP Rating IP66
Standards Met CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Maximum Operating Temperature +70°C
Length 229mm
Depth 142mm
Hazardous Area Certification ATEX
Width 105mm
Dimensions 229 x 105 x 142 mm
Minimum Operating Temperature -25°C
E-Stop Button Yes
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
537,00
(excl. BTW)
649,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
537,00 €
Related Products
The Lifeline 4 rope pull switch, also known ...
Description:
The Lifeline 4 rope pull switch, also known as a cable pull switch or grab wire switch, can be installed along or around awkward machinery such as conveyors and provides constant emergency stop access. The positive mode mechanism helps ensure ...
The Lifeline 4 rope pull switch can be ...
Description:
The Lifeline 4 rope pull switch can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. It is made from stainless steel 316 and is suitable for applications where there are hygiene ...
The Lifeline 4 rope pull switch, also known ...
Description:
The Lifeline 4 rope pull switch, also known as a cable pull switch or grab wire switch, can be installed along or around awkward machinery such as conveyors and provides constant emergency stop access. The positive mode mechanism helps ensure ...
The 1CPS cable pull safety switch series is ...
Description:
The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable ...