XY2CH Grab Wire Switch with E-Stop, 30m, 2NC, NO

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Telemecanique XY2CH Emergency Stop Rope Pull Switches

The XY2-CH emergncy stop rope pull switch (also known as a grab wire switch) is ideal for applications such as conveyor systems, packaging, textiles, transfer machines, presses, woodworking equipment, paint lines and test laboratories.

For machine tools, conveyers & handling applications
Recommended distance between cable supports: 5m
Built-in turnbuckle accessory
Pushbutton reset
Water and dust tight enclosure
Surface mount

Note

Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.

Approvals

UL Listed file number: E164353 CCN NKCR. CSA certified file number: LR44087 class 3211 03. CE marked.

Telemecanique Sensors Emergency Stop Rope Pull Switch

The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 1NO/2NC contact configuration. It has Zamak housing and has a straight mount orientation. The maximum AC and DC voltage is 240VAC and 250VDC respectively and the current rating of the switch is 3A and 270mA for AC and DC respectively. This switch has a rope span of 30m and rope tension indicator type.

Note:
Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.

Features and Benefits

• Size of cable entry is ISO M20
• For machine tools, conveyers and handling applications
• Recommended distance between cable supports is 5m
• Built-in turnbuckle accessory
• Pushbutton reset
• Water and dust tight enclosure
• Surface mount

Applications


Conveyor systems
• Packaging
• Textiles
• Transfer machines
• Presses
• Woodworking equipment
• Paint lines
• Test laboratories

Certifications


UL approved
• CCN certified
• CSA certified
• CE certified
• IP65 rated

Specificaties
Kenmerk Waarde
Range Preventa XY2
Series XY2CH
Reset Button Yes
Pole Configuration DPST
Normal State Configuration NO, 2NC
Indicator Type Rope Tension
Maximum Rope Span 30m
Maximum Current 1.5 A ac, 100 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Housing Material Stainless Steel (Cover), Zamak (Body)
Number of Cable Entries 3
Size of Cable Entries ISO M20
Dimensions 68 x 95 x 201 mm
Depth 201mm
Minimum Operating Temperature -25°C
E-Stop Button Yes
Maximum Operating Temperature +70°C
Length 68mm
IP Rating IP65
Standards Met CCC, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Width 95mm
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
170,00
(excl. BTW)
205,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
170,00 €
Related Products
Maximum system length: 75 mSwitch function: 2 NC ...
Description:
Maximum system length: 75 mSwitch function: 2 NC + 2 NO (standard)Built-in reset buttonCable pull eyelet, low costVisualisation of correct cable tensionMeets EN418 and IEC947-5-5Protection class IP67.
The Telemecanique sensors XY2CE is 240VAC voltage wire ...
Description:
The Telemecanique sensors XY2CE is 240VAC voltage wire switch. It has E-stop rope pull switch on right side-2NC+2NO with yellow pilot light, 230V-boot. • Contact operation slow break• Cover material is stainless steel• Housing material is Zamak• Maximum rope span ...
Designed to offer grabwire switch protection for personnel ...
Description:
Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machinesTypical applications:- conveyors, assembly lines, transfer lines, packaging machinery, process equipmentDouble grabwire switches are a convenient way of installing two rope pull ...
The Preventa XY2CJ emergency stop rope pull switches ...
Description:
The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual ...