Dremel 11mm 60W Corded Glue Gun, Type G - British 3-pin

  • RS-stocknr. 890-3376
  • Fabrikantnummer F.013.094.0JB
  • Fabrikant Dremel
Wetgeving en conformiteit
Land van herkomst: CH

Dremel High Temperature Glue Gun 940

Introducing the Dremel 940, this high-temperature hot glue gun is ideal for those small DIY jobs from repair work or finalising a build. The 940 can be taken anywhere without the need for power due to its removable cord. The ergonomic design of this glue gun allows it to be well balanced that makes it easy to use and comfortable. An integrated extendable stand allows the tool to be positioned for swift usage and easy placing down. The drip control silicon nozzle sleeve prevents any glue from dripping on a work surface or burning the nozzle.

Features and Benefits

• On/off switch, T-handle, stable base, extendable kickstand

• Heat-up time of 5 mins: for quick operation

• Glue output 18 g/min: for more demanding gluing jobs

• Removable cord: to enable limited operation without power

• Suitable for 11/12 mm glue sticks

• Ergonomic T-handle with soft grip: for comfortable and easy operation

• Drip control: to prevent dripping glue onto the project

• Silicon nozzle sleeves: to prevent from burning

• Power indicator light: shows if the tool is turned on


How do you change glue sticks?

A new glue stick will be needed to push the remainder of the old one and to start using the new one. A new glue stick is required when glue doesn't will not pump out when triggered.

Supplied with

• Dremel Glue Gun 940
• 3 x Dremel 11 mm Multipurpose High Temp Glue Sticks
• Instruction manual

Kenmerk Waarde
Type Hot Melt
Glue Stick Size 11mm
Corded/Cordless Corded
Plug Type Type G - British 3-pin
Model Glue Gun 940
Flow Rate 1.08kg/h
Heater Power 60W
Voltage Rating 100 → 240V
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
43 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
49,13 €
Related Products
Economic design Fast heat-up time - 3 minutes ...
Economic design Fast heat-up time - 3 minutes from cold High glue output over 1.8 k per hour Narrow profile aids visibility Runs on most voltages from 110 V to 240 V Fitted with eco efficient self-regulating 30 W (250 ...
For precise distribution of adhesives, the EPX manual ...
For precise distribution of adhesives, the EPX manual applicator must be used with the correct piston and mixer nozzle. Ergonomic design to reduce operator fatigue and for ease of use, especially in hard-to-reach areas. Dual component acrylic adhesives, with polymerisation ...
The 3M Group Access. HM hot melt adhesive ...
The 3M Group Access. HM hot melt adhesive gun uses pneumatic pressure to drive, up to 6 pounds of adhesive per hour to help keep high-demand production processes moving. Up to 3 cartridges can be fed through the rear loading ...
Professional glue gun for use with 12 mm ...
Professional glue gun for use with 12 mm diameter glue sticks.Prismatic Heating element™ heating system for faster heating times.Robust, lightweight and well-balanced. Ideal for all industrial and electronic assembly applications. 1.8 mm nozzle with silicone protection.Two temperature selections: Min/Max.