RS PRO Steel Girder Conduit Clamp, 8 → 14 mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Clip-on Conduit Clip

Either horizontal flange (H. flange) or vertical flange (V. flange)

//media.rs-online.com/t_line/L277389-01.gif
//media.rs-online.com/t_line/LF277389-01.gif
Specificaties
Kenmerk Waarde
Pipe/Conduit Diameter 19 → 26mm
Flange Thickness 8 → 14 mm
Maximum Load 12kg
Material Steel
Flange Thickness Maximum 14mm
Flange Thickness Minimum 8mm
Pipe/Conduit Diameter Maximum 26mm
Pipe/Conduit Diameter Minimum 19mm
375 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 25)
2,136
(excl. BTW)
2,585
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 +
2,136 €
53,40 €
*prijsindicatie
Related Products
A range of horizontal and vertical toggle-action clamps, ...
Description:
A range of horizontal and vertical toggle-action clamps, ideal for many temporary clamping uses, e.g. printed circuit board/module test jigs or general production or workshop use where fast and effective clamping is required. The design of the clamps enables speed ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...