Semikron SKYPER 12 press-fit C 450A, 15 A, 15V

  • RS-stocknr. 122-0386
  • Fabrikantnummer SKYPER 12 press-fit C 450A
  • Fabrikant Semikron
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

SKYPER® 12 Press-fit IGBT Driver Module

The Semikron SKYPER® 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V.
For suitable IGBT modules see 122-0385 to 122-0387

• Fits to 1200V & 1700V IGBT modules
• Drives Econodual and SEMIX press-fit modules
• Two 1W output channels for half-bridge applications
• Up to 8 μC gate charge output capacity
• Qualified safe operating area ensures best possible performance
• High reliability with MTBF rate > 5 Million hours
• Short-circuit protected over the complete operating temperature range
• Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off
• Robust rectangle signal transmission
• High noise immunity with short pulse suppression and robust interface
• Insulated over-temperature trip on secondary side
• Primary and secondary under-voltage protection (UVP)
• Integrated isolated power supply for the secondary side

MOSFET & IGBT Drivers, Semikron

Specificaties
Kenmerk Waarde
Logic Type CMOS
Output Current 15 A
Supply Voltage 15V
Mounting Type PCB Mount
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
80,83
(excl. BTW)
97,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
80,83 €
Related Products
High-side switches can safely drive high currents in ...
Description:
High-side switches can safely drive high currents in resistive, inductive and capacitive grounded loads. Designed to work in the harsh automotive environment they requires both robust, low on-resistance power switch and accurate analogue circuitry for diagnostic, protection and control functions. ...
The ON Semiconductor NCD5705B is a high-current, high-performance ...
Description:
The ON Semiconductor NCD5705B is a high-current, high-performance stand-alone IGBT driver for high power automotive applications that include PTC heaters, traction inverters, high voltage DC-DC and other auxiliary subsystems. The device offers a cost-effective solution by eliminating external output buffer. ...
The ON Semiconductor NCD57080A is a high-current single ...
Description:
The ON Semiconductor NCD57080A is a high-current single channel IGBT gate drivers with 3.75 kVrms internal galvanic isolation, designed for high system efficiency and reliability in high power applications. Short propagation delays with accurate matchingTight UVLO thresholds for bias flexibility. ...
The ON Semiconductor NCV57001F is a variant of ...
Description:
The ON Semiconductor NCV57001F is a variant of NCV57001 with reduced soft-turn-off time suited to drive large IGBTs or power modules. NCV57001F is a high-current single channel IGBT driver with internal galvanic isolation, designed for high system efficiency and reliability ...