Microchip MCP9600-I/MX, 18-bit Serial Thermocouple to Digital Converter Dual Differential Input, 20-Pin MQFN

  • RS-stocknr. 165-4198
  • Fabrikantnummer MCP9600-I/MX
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

MCP9600 Thermocouple Voltage Converter

The MCP9600 from Microchip is a Thermocouple to Digital Converter that translates the Thermocouple EMF into degrees Celsius with an accuracy of ±1.5°C. Integrated into the device is Cold-Junction Compensation.

The device includes user-programmable registers that allow the configuration of Low-Power modes, Temperature Alert outputs and Digital Filter for transient temperatures.

Features

Supports Type K, J, T, N, S, E, B and R Thermocouples
±1.5°C (Max.) Hot-Junction Accuracy
Measurement Resolution: Hot- and Cold-Junctions: 0.0625°C (typical)
Four Programmable Temperature Alert Outputs
Programmable Digital Filter for Temperature
Low Power Modes
2-wire Interface: I2C™ Compatible, 100 kHz, supports up to 8 devices per I2C bus
Operating Voltage Range: 2.7V to 5.5V
Operating Current: 300 μA (typical)
Shutdown Current: 2 μA (typical)

Analogue to Digital Converters - Microchip

Specificaties
Kenmerk Waarde
Resolution 18-bit
Number of ADCs 2
Digital Interface Type Serial (I2C)
Mounting Type Surface Mount
Number of Input Channels 1
Sampling Rate 3sps
Architecture Delta Sigma
Typical Single Supply Voltage 2.7 → 5.5 V
Package Type MQFN
Pin Count 20
Input Signal Type Differential
Input Type Voltage
Power Supply Type Single
Integral Nonlinearity Error 10ppm
Length 5mm
Dimensions 5 x 5 x 1mm
Maximum Operating Temperature +125 °C
Height 1mm
Minimum Operating Temperature -40 °C
Width 5mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06/04/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tube of 73)
4,204
(excl. BTW)
5,087
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
73 - 73
4,204 €
306,892 €
146 +
3,815 €
278,495 €
*prijsindicatie
Related Products
The AD823x devices are integrated signal conditioning blocks ...
Description:
The AD823x devices are integrated signal conditioning blocks for ECG and other biopotential measurement applications. They are designed to extract, amplify and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote ...
16-Bit A/D Converters16-Bit D/A ConvertersProgrammable Input/Output Sample Rates75 ...
Description:
16-Bit A/D Converters16-Bit D/A ConvertersProgrammable Input/Output Sample Rates75 dB ADC SNR70 db DAC SNR64 ksps Maximum Sample Rate-90 db CrosstalkProgrammable Input/Output GainLow group Delay: 25 μs per ADC ch50 μs per DAC chFlexible Serial Port Allows Up to 4 Codecs ...
The AD823x devices are integrated signal conditioning blocks ...
Description:
The AD823x devices are integrated signal conditioning blocks for ECG and other biopotential measurement applications. They are designed to extract, amplify and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote ...
Description:
A range of Switch Debounce ICs that are intended to ensure a clean interface between electromechanical switches and subsequent digital circuitry. The debounce function is effective on both closing and opening switch operations, and no additional components are required. Inputs ...