RS PRO Carbon Dioxide Gas Detection, LED

Wetgeving en conformiteit
Land van herkomst: CN

RS PRO RS-967 Desktop Indoor Air Quality Monitor, CO2 Gas Detector

Introducing the portable RS PRO Carbon Dioxide Gas Detector which can detect and monitor CO2 levels to ensure that consistent and acceptable levels of breathable indoor air are present. It can detect concentrations as low as 0ppm and up to 9999 ppm, meaning it can operate in the most difficult indoor environments with minimal interference. This effective and easy to use carbon dioxide gas detection unit from RS PRO is ideal for ensuring the immediate indoor air quality (IAQ) is good, especially for individuals who may have respiratory issues where air quality is a high priority.

Features and Benefits:

• High-quality CO2 monitor with a large LCD display for easy visual identification
• Real-time readings for accurate monitoring and detection
• Also measures immediate air temperature and humidity
• Compact and ergonomic design, suitable for use in workspaces where there is limited space
• This portable CO2 monitor can be used to observe and control CO2 levels indoors
• Automatic shutdown if the device has a low battery or if it is left idle for more than 10 minutes


Generally, gas detectors or monitors locate a variety of gases like combustible and explosive gas leaks from petrol or gasoline, methane, butane, sewer gas, and other flammable gases that could cause serious harm to the surrounding environment and the people within that environment. It is a key piece of equipment when working with gas line installation and general maintenance and repair to ensure the safety of any individuals at risk when working in environments where any type of gas is present. IAQ meters work in a similar way in that they measure and monitor the air inside to ensure that it is safe enough and acceptable enough to work or live in. Often, indoor air quality meters can be used in the same environments as gas detection units like:
• Oil production
• Smelting
• Chemical
• Municipal
• Sewage treatment
• Electricity
• Coal gas
• Mining
• Tunnel construction
• Fire
• Storage
• Paper
• Pharmaceutical
• Brewing

How long do Gas Detectors and their sensors last?

The gas detection or indoor air quality unit can last a lifetime if looked after, just like any test and measurement tool. Generally, gas detector sensors can last anything from 2-3 years in perfect conditions. It is always wise to check the battery of the unit regularly and if you have a gas detector that can have the sensor replaced, that this is also done as part of its maintenance.

What gases does this monitor detect?

This gas detector can detect and monitor carbon dioxide levels, as well as temperature and humidity for general indoor air quality.

Kenmerk Waarde
Gases Detected Carbon Dioxide
Accuracy ±1 %, ±3 %, ±5 %
Application Air Quality Control
ATEX Approval No
Meter Type Workstation Monitor
Display Type LED
Audible Alarm No
Power Source Battery
Battery Type Rechargable NiMH
Dimensions 100 x 48 x 110mm
Weight 210g
Length 100mm
Width 48mm
Height 110mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
49 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
134,60 €
Related Products
The PFM series from SMC are dual flow ...
The PFM series from SMC are dual flow switches designed to detect microchip component adsorption in vacuum, congestion in filters and nozzles. Compact and light weight design, suitable for use with carbon dioxide, air, nitrogen or argon. Flow rate range: ...
Crowcon T4 portable multigas detectors are intrinsically safe, ...
Crowcon T4 portable multigas detectors are intrinsically safe, hazardous area certified, for use in harsh environments. They offer compliance, robustness and low cost ownership in a simple-to-use solution. The large single button allows operation while wearing gloves. The intuitive menu ...
The XLamp XP-E2 series from Cree are high ...
The XLamp XP-E2 series from Cree are high performance LEDs with a single die source for precise optical control. They offer high light output and maximum efficacy to applications such as LED retrofit lamps, outdoor, indoor and emergency vehicles. The ...
The Mini TOPLED series of LEDs, from Osram ...
The Mini TOPLED series of LEDs, from Osram Opto Semiconductors, are small package devices with a high quality, directed light output. The Mini TOPLED LEDs have an integrated reflector and an extremely wide viewing angle. With their high brightness class, ...