Aim-TTi TG315 Function Generator 3MHz

  • RS-stocknr. 465-8906
  • Fabrikantnummer TG315
  • Fabrikant Aim-TTi
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Aim-TTi TG310 & TG315 3MHz Function Generator with Dual Digital Displays

The TG315 is a low-cost 3MHz function generator which incorporates an LCD display that gives a simultaneous readout of frequency and amplitude (or dc offset). Wide frequency range is matched by very high waveform quality at all frequencies and amplitudes. The digital display provides fast update even at low frequencies. The TG310 is a simplified version of the TG315, having a calibrated frequency dial and no LCD display.

Simultaneous digital display of frequency and level
High accuracy frequency readout with fast update
2mV to 20V pk-pk output from 50Ω or 600Ω
Level display compensated for attenuator setting
1000:1 frequency change by vernier or external sweep input
Variable symmetry at constant frequency
Display annunciators including clipping indicator

Frequency  
Frequency Range 0.03Hz to 3MHz in 7 overlapping decade ranges with vernier control
Dial Control Range 1000:1 on each range
External Sweep 1000:1 linearly with applied voltage
Frequency Display Auto-ranging reciprocal measurement giving 4 digit resolution. Accuracy ±1 digit down to 0.2Hz, ±1% below 0.2Hz
Sweep  
External Sweep Linear control by external voltage, 1000:1 maximum on each range
Sine 50Ω and 600Ω via separate sockets
Distortion Less than 0.5% on 300Hz, 3kHz and 30kHz ranges; all harmonics> 25dB below fundamental on 3MHz range
Amplitude Flatness ±0.2dB to 200kHz; ±2dB to 3MHz
Triangle Better than 99% to 200kHz
Squarewave <0.5% on the 200, 2k and 20k ranges <1% on the 2, 20 and 200k ranges Harmonics >25dB down on 2M range
Rise and Fall Times <100ns
Mark-Space Ratio 1:1 ±1% to 100kHz
D.C ±10V (0dB) or ±1V (-20dB attenuator)
Range ±10V (unterminated)
Symmetry 50Ω and 600Ω via separate sockets
Symmetry Range Variable typically between 1:9 and 9:1 (on top decade of each range), frequency divided by 10 when Symmetry is selected
Outputs  
Output Impedance 50Ω, alternative 600Ω output available
Amplitude 2mV to 20V peak-peak (open circuit) in four ranges with 20dB control within each
DC Offset Range ±10V (Offset plus signal limited to ±10V), Accuracy ±(2%+1 digit)
Amplitude Display 3 digit display showing pk-pk or rms amplitude or dc offset, compensated for attenuator setting. Accuracy ±5% of range
Aux Output 0 to 5V TTL/CMOS levels (2TTL loads)
General  
Power Requirement 220V or 230Vac ±10%, 50/60Hz. Installation Category II.
Safety and EMC Complies with EN61010-1 and EN61326
Specificaties
Kenmerk Waarde
Maximum Frequency Range Sinewave 3MHz
Minimum Frequency Range Sinewave 0.03Hz
Maximum Frequency Range Square Pulse and Arbitrary Waveform 3MHz
Minimum Frequency Range Square Pulse and Arbitrary Waveform 0.03 Hz
Maximum Frequency Range Triangle/Saw 3MHz
Minimum Frequency Range Triangle/Saw 0.03Hz
Digital Frequency Yes
Digital Amplitude and Offset Yes
Time Base Accuracy ±10ppm
Height 88mm
Maximum Operating Temperature +40°C
Output Amplitude 20V Pk-Pk
Length 235mm
Frequency Range Square Pulse and Arbitrary Waveform 0.03 Hz → 3 MHz
Input Impedance 10 kΩ
Output Impedance 50 Ω, 600 Ω
Plug Type Type C - European Plug, Type G - British 3-pin
Model Number p TG315
TTL Output Level 0 → 5V
Dimensions 235 x 260 x 88mm
CMOS Output Level 0 → 5V
Attenuation -60 dB, -40 dB, -20 dB, 0 dB
Minimum Operating Temperature +5°C
Width 260mm
Weight 1.9kg
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
295,00
(excl. BTW)
356,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
295,00 €
Related Products
RS Pro AFG-21000/AFG-21100 AFGs use direct digital synthesis ...
Description:
RS Pro AFG-21000/AFG-21100 AFGs use direct digital synthesis (DDS) to generate signals at precise frequencies through a unique memory access and clocking mechanism. They offer an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), ...
RS Pro AFG-21000/AFG-21100 AFGs use direct digital synthesis ...
Description:
RS Pro AFG-21000/AFG-21100 AFGs use direct digital synthesis (DDS) to generate signals at precise frequencies through a unique memory access and clocking mechanism. They offer an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), ...
The AFG31000 Series is the best-in-class waveform generation ...
Description:
The AFG31000 Series is the best-in-class waveform generation platform designed for the most demanding expectations on performance and versatility, throughout the whole process of product realization. The 9-inch capacitive touch screen, built-in arbitrary waveform application, and patented InstaView™ technology ...
The Keysight 33210A function/arbitrary waveform generator uses direct ...
Description:
The Keysight 33210A function/arbitrary waveform generator uses direct digital synthesis (DDS) technology to create a stable, accurate output signal with inherently clean, low distortion sine waves. The 33210A can generate variable-edge-time pulses up to 5MHz. Its variable period, pulse width ...