Altera DK-DEV-10M50-A MAX 10 Development Kit

  • RS-stocknr. 906-3924
  • Fabrikantnummer DK-DEV-10M50-A
  • Fabrikant Altera
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

MAX 10 FPGA Development Kit, Altera

The Altera MAX 10 FPGA development kit is a full featured design platform built around a 50 K logic elements (LEs). It is optimised for system level integration with on-die ADC, dual-configuration flash, and DDR3 memory interface support. It has a range of connectivity options including an on-board USB-Blaster II, HDMI output, and dual Ethernet for industrial Ethernet applications. The MAX 10 FPGA Development Kit provides a system-level prototyping solution for industrial, automotive and consumer applications.

With the Altera MAX 10 FPGA Development Kit, you can:

- Develop designs for the 10M50D, F484 package FPGA
- Measure the performance of the MAX 10 FPGA ADC block conversion
- Interface MAX 10 FPGAs to DDR3 memory at 300 MHz performance
- Run embedded Linux using the Nios II processor
- Interface to daughter cards and peripherals using HSMC and Digilent Pmod Compatible connectors
- Measure FPGA power using the power monitor graphical user interface (GUI)
- Reuse the PCB board and schematic as a model for your design

Programming and Configuration
- Embedded USB-Blaster II (JTAG)
- Optional JTAG direct via 10-pin header

Memory Devices
- 64-Mx16 1 GB DDR3 SDRAM with soft memory controller
- 128-Mx8 1 GB DDR3 SDRAM with soft memory controller
- 512 MB Quad serial peripheral interface (quad SPI) flash

Communication Ports
- 2 x Gigabit Ethernet RJ-45 ports
- mini-USB2.0 UART
- HDMI video output
- Universal high-speed mezzanine card (HSMC) connector
- 2 x 12-pin Digilent Pmod compatible connectors

Analogue
- 2 x MAX 10 FPGA ADC SMA inputs
- 2 x 10 ADC header
- Potentiometer input to ADC
- External 16-bit DAC with SMA output

Clocking
- 25 MHz single-ended, external oscillator clock source
- Silicon labs clock generator

Supplied with
- Mini USB cable for on-board USB-Blaster II
- 2A Power Supply and cable
- Free Quartus II Web Edition design software

Featured Devices

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specificaties
Kenmerk Waarde
Programmable Logic Technology FPGA
Kit Classification Development Kit
Kit Name MAX 10
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
184,38
(excl. BTW)
223,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
184,38 €
Related Products
From STMicroelectronics, STM32F769I-DISCX Discovery kits feature a STM32F769NIH6 ...
Description:
From STMicroelectronics, STM32F769I-DISCX Discovery kits feature a STM32F769NIH6 microcontroller based on the ARM Cortex-M7 32-bit core. STM32F769 Discovery kits provide you with the quickest way to evaluate the STM32F7 series. These discovery kits feature Arduino connectivity that enables you to ...
The MSP430 Platform is a range of mixed-signal, ...
Description:
The MSP430 Platform is a range of mixed-signal, ultra-low power microcontrollers from Texas Instruments. The 16-bit RISC architecture is perfectly suited for wireless, low-power industrial and portable applications. This established range has a strong and popular position due to its ...
The STM8S-DISCOVERY board aids evaluation of the STM8S ...
Description:
The STM8S-DISCOVERY board aids evaluation of the STM8S family of 8-bit microcontrollers. The ST-LINK module may be detached from the processor board and used to program/debug other STM8S-based boards. • 16MHz STM8S105C6T6 microcontroller with 32KB Flash memory, 2KB RAM, 1KB ...
The STM8L-DISCOVERY kit is based on the STM8L152C6T6 ...
Description:
The STM8L-DISCOVERY kit is based on the STM8L152C6T6 8-bit ultra-low power microcontroller. • 16MHz STM8L152C6T6 microcontroller, 32KB Flash, 2KB RAM, 1KB EEPROM• SWIM connector• PC connection via miniUSB socket• 6-Digit, 4-Bar LCD display panel• Extension header for all GPIO• 2 ...