Lattice Semiconductor iCE40LP1K-BLINK-EVN iCEblink40 Evaluation Kit iCEblink40-LP1K

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Lattice iCEblink40-LP1K Evaluation Kit

A low-cost platform for evaluating and developing with the low-power iCE40LP1K FPGA. The board provides access to general-purpose I/O and includes capacitive-touch buttons and LEDs. The board is powered and programmed via USB. An on-board microcontroller enables 2-way communication with the iCE40LP1K FPGA. The free iCEcube2™ development tool controls programming, accesses virtual I/O functions and runs the included demos. The tools can be downloaded from the Lattice website.

Low-power, small-footprint iCE40LP1K FPGA in 84-pin QFNS package
USB programming, debugging, virtual I/O functions, and power supply
4 x User LEDs
4 x Capacitive-touch buttons
3.3MHz clock source
1Mbit SPI serial configuration PROM
Supported by Lattice iCEcube2 design software
63 x LVCMOS/LVTTL (3.3V) digital I/O connections on 0.1in through-hole connections
Supports third-party I/O expansion boards and modules, including 3.3V Arduino Shield boards (requires additional sockets, not supplied)

Supplied with

USB cable for power & programming, QuickStart Guide

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specificaties
Kenmerk Waarde
Programmable Logic Technology FPGA
Kit Classification Evaluation Kit
Featured Device ICEblink40-LP1K
Kit Name ICEblink40
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20/01/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
139,20
(excl. BTW)
168,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
139,20 €
Related Products
PLL click is a frequency multiplier which uses ...
Description:
PLL click is a frequency multiplier which uses the Phase-Locked Loop (PLL) techniques to provide a high-frequency clock output from a cheap, standard fundamental mode crystal oscillator. In addition to this, PLL click also offers a choice between nine different ...
The P-NUCLEO-LRWAN2 STM32 Nucleo starter pack for LoRa® ...
Description:
The P-NUCLEO-LRWAN2 STM32 Nucleo starter pack for LoRa® technology and high-performance (G)FSK/OOK/(G)MSK modulations is a development tool to learn and quickly develop low-power wide-area network (LPWAN) solutions. The pack contains both an LPWAN end-node and its related gateway. It is ...
The GB60 demonstration kit contains everything a designer ...
Description:
The GB60 demonstration kit contains everything a designer needs to develop and evaluate MC9S08GB or GT Family applications. M9S08GB60 microcontroller32kHz crystal for RTCRegulated +3.3V power supply2xRS-232 ports with DB9-S connectorsMCU I/O port connector provides all digital I/OAnalogue or PTB I/O ...
The RX71M Microcontroller Starter Kit is available in ...
Description:
The RX71M Microcontroller Starter Kit is available in two versions differing only in the IDE tool supported: CS+ or Eclipse Embedded (e²studio). The kit contains a Pmod™ compatible LCD module and an E1 Emulator pod for debugging purposes. 240MHz R5F571MLCDFC ...