Hirose FH28 0.5mm Pitch 40 Way Right Angle SMT Female FPC Connector, ZIF Bottom Contact

  • RS-stocknr. 685-1315
  • Fabrikantnummer FH28E-40S-0.5SH(05)
  • Fabrikant Hirose
Wetgeving en conformiteit
Land van herkomst: JP

Hirose FH28 Series 0.5 mm FPC/FFC Connectors

FH28 0.5 mm ZIF (zero insertion force) FPC/FFC connectors with a robust, ruggedized design. These FH28 FPC/FFC connectors have a robust flip lock actuator which is supported either end of the connector by reinforced metal fittings. The actuator is held down by a hook at each contact point along its whole length ensuring a secure connection and preventing the actuator from disengaging. When the actuator is fully closed, it produces a tactile click to confirm it is firmly locked in place. These FH28 FPC/FFC connectors feature side catches for use with tabbed FPC. The positioning tabs on the FPC slot inside these catches allowing it to be accurately aligned and positioned. When the actuator is locked down the tabs act as a strain relief and increase the retention force of the FPC. These FH28 FPC/FFC connectors can also be used with straight sided or non-tabbed FPC. The bottom of these FPC/FFC connectors is solid and the contacts are not exposed allowing the connector to be mounted over conductive traces on the PCB.
These FH28 0.5 mm ZIF FPC/FFC connectors accept a standard 0.3 mm thick FPC/FCC
FH28E and FH28H FPC/FFC connectors have a metal fitting that extends further out from housings edge for manual soldering
FH28H FPC/FFC connectors have a narrower, space saving actuator

Features and Benefits

• Robust design
• Reinforced flip-lock actuator for easy FPC/FFC insertion and secure retention
• Tactile click confirms full closure of actuator
• Side catches for increased tabbed FPC/FFC retention
• Enclosed design enables mounting over conductive traces on the PCB


• Industrial equipment
• Consumer electronics
• GPS navigation
• Test and measurement equipment
• Barcode readers
• Medical devices

0.5mm FPC/FFC - Hirose

Kenmerk Waarde
Number of Contacts 40
Contact Material Phosphor Bronze
Pitch 0.5mm
Mounting Type Surface Mount
Gender Female
Termination Type ZIF Bottom Contact
Body Orientation Right Angle
Locking Mechanism Yes
Current Rating 500mA
Voltage Rating 50 V ac
Series FH28
Number of Rows 1
Contact Plating Gold
Housing Material Liquid Crystal Polymer
Minimum Operating Temperature -40°C
Termination Method Solder
Maximum Operating Temperature +105°C
1060 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
1,412 €
14,12 €
250 - 990
1,20 €
12,00 €
1000 - 4990
1,059 €
10,59 €
5000 - 9990
0,953 €
9,53 €
10000 +
0,847 €
8,47 €
Related Products
2.5 mm Pitch Connector for Discrete Wire Connection. ...
2.5 mm Pitch Connector for Discrete Wire Connection. Board Mounting Height (Crimping Type)Insulation Displacement Area Protected by Protector (ID Type)Easy Connection by Easy Tool (ID Type)Intermediate Connection Possible (ID Type).
Cabline-VS is specially developed for the transmission / ...
Cabline-VS is specially developed for the transmission / shield performance corresponded to displayPort signal, which is embedded standard interface for the coming FPD. Cabline-VS has been loaded with great features, such as high-speed and versatility with highly reliable contact structure ...
WR-MPC3 dual row right angle mount shrouded male ...
WR-MPC3 dual row right angle mount shrouded male header connectors with a 3.0mm pitch and board locks. These WR-MPC3 3.0mm dual row right angle header connectors have a black UL94-V0 PA9T insulator, tin plated copper alloy stamped contacts and mate ...
DF13 series 1.25 mm PCB headers with a ...
DF13 series 1.25 mm PCB headers with a compact, miniaturised design available in single and double row configurations. The space saving design of the double row headers enables them to achieve 30% higher density than the single row versions within ...