Wurth Elektronik WR-FPC 0.5mm Pitch 24 Way Horizontal SMT Female FPC Connector, ZIF Bottom Contact

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Wurth WR-FPC 0.50mm FPC ZIF Connectors, Bottom Contact with Hinged Actuator

WR-FPC 0.5 mm SMT FPC ZIF connectors with a bottom contact configuration and hinged flip-lock actuator. These 0.5mm FPC ZIF connectors have a low profile, lightweight, space saving design and meet the increasing demand for high density, secure connections in a wide range of miniaturised electronic applications. A mating connector is not required with these FPC SMT ZIF connectors, the cable is inserted directly into the connector providing a cost effective one connector wire to board solution. These WR-FPC 0.5 mm FPC connectors feature a flip-lock hinge type actuator which secures the connection between the FFC/FPC and the connector terminals. A solder retention feature helps to secure the connector to the PCB during the soldering process. Typical applications for these 0.5mm FPC ZIF connectors include applications where a connection to a small display or keyboard is required.

Wurth 0.5mm FPC Connectors and Jumper Cables

Specificaties
Kenmerk Waarde
Number of Contacts 24
Contact Material Phosphor Bronze
Pitch 0.5mm
Mounting Type Surface Mount
Gender Female
Termination Type ZIF Bottom Contact
Body Orientation Horizontal
Current Rating 500mA
Voltage Rating 50 V ac/dc
Series WR-FPC
Number of Rows 1
Contact Plating Tin over Nickel
Maximum Operating Temperature +105°C
Minimum Operating Temperature -40°C
Termination Method Solder
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Tape of 5)
1,68
(excl. BTW)
2,03
(incl. BTW)
Aantal stuks
Per stuk
Per tape*
5 - 45
1,68 €
8,40 €
50 - 245
1,58 €
7,90 €
250 - 495
1,42 €
7,10 €
500 - 995
1,34 €
6,70 €
1000 +
1,16 €
5,80 €
*prijsindicatie
Verpakkingsopties
Related Products
FMN Series of PCB connectors suitable for accepting ...
Description:
FMN Series of PCB connectors suitable for accepting FFC cable on a 1mm pitch. Circuits are staggered on a 1mm pitch with 2mm between each row. Recommended PCB hole dia 0.75mm.
Trio-Mate flexible film connectors with a 2.54mm centerline. ...
Description:
Trio-Mate flexible film connectors with a 2.54mm centerline. These Trio-Mate receptacle connectors accept Flat Flexible Cable (FFC), flexible etched circuitry (FPC) or membrane switch circuitry 0.13 to 0.38 mm thick in the contact area. The Trio-Mate flexible film connector has ...
52808 series Non-ZIF SMT vertical mount FPC connectors ...
Description:
52808 series Non-ZIF SMT vertical mount FPC connectors with a 1.00 mm pitch and contacts on one side. The housings of these FPC connectors are chamfered in one corner to ensure correct orientation of the FPC. The connector contacts move ...
0.50 mm Premo-Flex Flat Flex jumper cables for ...
Description:
0.50 mm Premo-Flex Flat Flex jumper cables for terminating to ZIF (Zero Insertion Force), non-ZIF or LIF (Low Insertion Force) FPC connectors to create durable and flexible board to board connections. The cables have a 0.2mm cable thickness and are ...