Foot Switch Bellows for Foot Switch

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Foot/Hand Actuator

An air actuator, for foot or hand operation, moulded in PVC complete with bayonet action mounting plate and 2 m of PVC tube 3 mm bore, 6 mm O.D.
Suitable for use with all air-operated switch elements.

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Specificaties
Kenmerk Waarde
Accessory Type Bellow
For Use With Foot Switch
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
113 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,11
(excl. BTW)
17,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
14,11 €
5 - 9
13,68 €
10 +
13,23 €
Related Products
RS PRO light duty foot switches which are ...
Description:
RS PRO light duty foot switches which are ideal for a number of applications. They have a light weight polymeric housing with non-skid base pads and the raised ribs on the cover ensure a good grip.Foot switches are commonly used ...
RS PRO general purpose light duty foot switch ...
Description:
RS PRO general purpose light duty foot switch with SPDT (Single Pole Double Throw) Contacts. Foot switches are commonly used on large machinery were hand operated switches are a safety concern. This foot controller pedal is black and grey in ...
RS PRO momentary stainless steel foot switches are ...
Description:
RS PRO momentary stainless steel foot switches are small and compact and come supplied with 2m of cable. They have Single Pole Double Throw (SPDT) contacts and is IPX7 rating meaning it is protected from water.Foot switches are commonly used ...
Steute RF GF wireless foot switch features sWave ...
Description:
Steute RF GF wireless foot switch features sWave 2.4 GHz wireless technology. The sWave wireless protocol offers a reliable, manageable and practicable wireless technology developed especially for safety-related industrial applications. The RF GF foot switch has an aluminium diecast enclosure ...