Siemens Control Unit Control Unit

  • RS-stocknr. 804-3872
  • Fabrikantnummer 7MH7562-4AA
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CA
Productomschrijving

SITRANS CU 02 Controller

SITRANS CU 02 control module for use with Siemens AS100 acoustic flow detection sensors. These control modules can be mounted up to 500m from the sensor and each relay output can be programmed independently.

0 to 10V DC input
2 programmable relay outputs (Form C, latching or non latching)
4 to 20 mA DC analogue output
DIN rail mounting
IP20 ingress protection
Operating conditions: -20°C to +50°
Supply Voltage: 115 VAC 8043878 /230 VAC 8043872

Specificaties
Kenmerk Waarde
Accessory Type Control Unit
For Use With AS 100 Acoustic Sensor
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 894,49 €
596,00
(excl. BTW)
721,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
596,00 €
Related Products
Series S030 in-line flow adaptors incorporating paddlewheel transducer ...
Description:
Series S030 in-line flow adaptors incorporating paddlewheel transducer for use with flow control transmitter SE30 HT. Flow control transmitter for liquid flow measurementSuitable for flow measurement and ON/OFF control in process applicationsSensor unit interfaces via S030 pipework flow adaptor Supply ...
The PFM series from SMC are dual flow ...
Description:
The PFM series from SMC are dual flow switches designed to detect microchip component adsorption in vacuum, congestion in filters and nozzles. Compact and light weight design, suitable for use with carbon dioxide, air, nitrogen or argon. Flow rate range: ...
MR3000 molded flow meters supplied with scales in ...
Description:
MR3000 molded flow meters supplied with scales in LPM and SCFH for air, or CCM and GPH for water.Manufactured from high-impact polycarbonate, the MR3000 series can operate at pressures of 100 psig and temperatures of 150°F (65°C).These economically designed units ...
The magnetic-inductive volumetric flow sensors of the SM ...
Description:
The magnetic-inductive volumetric flow sensors of the SM series monitor liquids. They detect the three process categories volumetric flow quantity, consumed quantity and medium temperature. Peak consumption, present consumption or accumulated consumption can be accessed and adjusted via programmed switch ...