RS PRO Piston Inline Flow Switch, 0.5 L/min → 3 L/min,

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

High pressure and temperature capabilities
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass

Note

If used on air system, life expectancy of the unit is greatly reduced due to instantaneous pressure loss on the piston, which has no damping.

Specificaties
Kenmerk Waarde
Media Monitored Liquid
Device Type Piston Inline
Minimum Flow Rate 0.5 L/min
Maximum Flow Rate 3 L/min
Supply Voltage 200 V ac
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP
Maximum Pressure 300bar
Material Brass
Maximum Media Temperature +100°C
Maximum Operating Temperature +120°C
Current Rating 1 A
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
223,76
(excl. BTW)
270,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
223,76 €
Related Products
Side mounting switches consisting of a reed switch ...
Description:
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientationAll units WBS approved, product for use in hot and cold ...
The RSF66 float switches are made from PPS ...
Description:
The RSF66 float switches are made from PPS (Polyphenylene Sulphide) therefore suitable for use with a wide range of liquids. The float switches also offer a number of switching positions and therefore meet a variety of system needs. High and ...
These SSF67 series floats from Cynergy 3 have ...
Description:
These SSF67 series floats from Cynergy 3 have been designed to provide different switching options with a longer reach float. The float is made with stainless steel 316L making it suitable to use with aggressive liquids and in applications where ...
High pressure, variable flow indicator with a graduated ...
Description:
High pressure, variable flow indicator with a graduated flow scale on the outer viewing sleeve and a indicator ring which is magnetically coupled to an internal piston. Utilises the technique of differential pressure across a piston which, as the flow ...