Omron, 0 → 10 L/min Mass Flow Controller, 3-Wire Connector, Analogue, 10.8 → 26.4 V dc

  • RS-stocknr. 619-1871
  • Fabrikantnummer D6F-10A5-000
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

MEMS Mass Flow Sensor - High flow

Compact, intelligent sensors featuring MEMS technology for precision mass airflow.

Precision unidirectional mass airflow
Stable output across full scale
Compact size: 78 (D) x 30 (W) x 30 (H) mm
Low power consumption
Horizontal mounting feature with NBR 'O' ring
Cable supplied separately see stock number 619-1922
Applications include; Pick & Place systems, industrial processes, oxygen contentrators/conservators, leak detection, spectrososcopy, mass flow controllers, scientific/test equipment,fuel cell control

Note

No manifold or O rings are supplied.

Warning

  • Air to be measured needs to be dry and free of large particles e.g. dust, oil, mist
Specificaties
Kenmerk Waarde
Maximum Flow Rate 0 → 10 L/min
Electrical Connection 3-Wire Connector
Control Output Analogue
Mounting Style Compact
Supply Voltage 10.8 → 26.4 V dc
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was 480,00 €
454,24
(excl. BTW)
549,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
454,24 €
Related Products
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Lock speed setting, with the touch of a ...
Description:
Lock speed setting, with the touch of a buttonIt can be locked only by pushing the handle after adjustment. Convenient opening indication scaleThe opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments. Easy ...
Using SMC speed controls with built in one-touch ...
Description:
Using SMC speed controls with built in one-touch fittings minimizes installation time, reduces mounting height and enables a more compact machine design. These speed controls allow the body to be rotated to facilitate simple installation. Available in thread sizes from ...
The Turck flow controller sensor monitors the flow ...
Description:
The Turck flow controller sensor monitors the flow rate of gaseous and liquid media, irrespective of the viscosity and electric conductivity of the medium. Its operating measurement range of water is 1cm/s to 150cm/s and operating measurement range of oil ...