Omron, 0 → 2 L/min Mass Flow Controller, Cable, Analogue, 10.8 → 26.4 V dc

  • RS-stocknr. 619-1843
  • Fabrikantnummer D6F-02A1-110
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

MEMS Mass Flow Sensor

Compact, intelligent sensors featuring MEMS technology for precision mass airflow and LNG measurement.

Precision unidirectional mass airflow
Stable output across full scale
Low power consumption
Joint type: Bamboo with external dia. 7.4mm (min.); 8.6mm (max.) passage diameter 4mm. Except 619-1859 which is an RC 1/4 screw
Supplied with cable, 100mm long
Applications include; Pick & Place systems, industrial processes, oxygen concentrators/conservators, leak detection, spectrososcopy, mass flow controllers, scientific/test equipment, fuel cell control

Warning

  • Air to be measured needs to be dry and free of large particles e.g. dust, oil, mist

Warning

  • Air to be measured needs to be dry and free of large particles e.g. dust, oil, mist
Specificaties
Kenmerk Waarde
Maximum Flow Rate 0 → 2 L/min
Electrical Connection Cable
Control Output Analogue
Mounting Style Compact
Supply Voltage 10.8 → 26.4 V dc
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
200,19
(excl. BTW)
242,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
200,19 €
Related Products
The ifm electronic airflow sensor/switch can sense a ...
Description:
The ifm electronic airflow sensor/switch can sense a maximum flow rate of 1000cm³/s working on the calorimetric principle. It has a supply voltage rating of 24VDC. The immersion depth into the duct can be flexibly varied via the supplied mounting ...
The principle of operation is when a liquid ...
Description:
The principle of operation is when a liquid flows through the pipe, the paddle wheel in the fitting (S030 Flow Adaptor -available separately) is set in rotation inducing a measuring frequency in the transducer, which is proportional to the flow. ...
Two wall mounting control units and adaptor mount ...
Description:
Two wall mounting control units and adaptor mount transmitter module designed to provide precise control of liquid flow quantities. Induces a measured frequency into a transducer which is proportional to the flow rate. Selectable dosage mode, overfill correction, allocation of ...
Designed for high temperature, continuous flow measurement of ...
Description:
Designed for high temperature, continuous flow measurement of neutral, slightly aggressive, solid-free liquids, in hazardous environments. For liquid flow measurementFrequency output with pulse signal proportional to the flow rateInterfaces via S030HT pipework flow adaptor with pressure-tight quarter turn ...