Gems Sensors Horizontal, Vertical Float Switch, Stainless Steel, Relay, Float, 1m

  • RS-stocknr. 395-7094
  • Fabrikantnummer 010-0391
  • Fabrikant Gems Sensors
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving
//media.rs-online.com/t_line/L395704-04.gif
//media.rs-online.com/t_line/LI395704-04.gif

Gems Sensors Float Switch

The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch.
It has mounting thread G1/4in

Warning:
The cable entry point must not be submerged under any circumstances
They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside
On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid

Features and Benefits

Operating pressure is 30bar
Depth of immersion is 30mm
Min SG of liquids is 0.75
Reed switch is SPST 100V
Electrical High temperature version AWG18 PTFE

Certifications

IP64 rated

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal, Vertical
Switch Output Relay
Body Material Stainless Steel
Cable Length 1m
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Maximum Pressure 30bar
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
166,85
(excl. BTW)
201,89
(incl. BTW)
Aantal stuks
Per stuk
1 +
166,85 €
Related Products
The LS-3 Series of Gems sensors level switches. ...
Description:
The LS-3 Series of Gems sensors level switches. Ideal for shallow tanks or restricted spaces, or for any low-cost, high volume use. Easy to install, the LS-3 can be used either way up and is easy switched between normally closed ...
The Gems Sensors LS-7 series are ideal for ...
Description:
The Gems Sensors LS-7 series are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers a broad compatibility in water, oils and chemicals, making them suitable for various applications. All models are highly reliable and ...
Description:
The RS PRO flange mount float switch has 2 NC DPST-Db contacts. It is used for a close tank or sump. The float switch has a vertical or horizontal operating position. • Made of polypropylene• Maximum AC voltage 230V (Single ...
Float Switches from Pepperl + Fuchs. Designed with ...
Description:
Float Switches from Pepperl + Fuchs. Designed with a highly buoyant ball and to be used with any sequential circuit, because of the buoyancy it is ideally suited to low density liquids. The switch element is mercury free. The float ...