S/steel horizontal mount floatswitch,50W

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Stainless Steel, Vertical Float Switch – Horizontal Mount

Horizontal mount with right angled stem
SPST output
Internal vessel mounting
Float reversal, rise or fall operate
Top or bottom tank mounting
Silicone sealing washer
Maximum pressure: 10 bar Kg/cm2
Cable: XLPE, AWG22
Contact resistance: 200mΩ
Clearance hole diameter: 10mm

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal
Switch Output Direct Load
Body Material Stainless Steel
Cable Length 300mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +120°C
Maximum AC Voltage 300V
Maximum DC Voltage 300V
Maximum Current 500 mA
Maximum Pressure 10bar
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
122 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
78,53
(excl. BTW)
95,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
78,53 €
5 - 9
76,12 €
10 +
73,65 €
Related Products
The Gems Sensors LS-7 series are ideal for ...
Description:
The Gems Sensors LS-7 series are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers a broad compatibility in water, oils and chemicals, making them suitable for various applications. All models are highly reliable and ...
The RS PRO external vertical mounting float switch ...
Description:
The RS PRO external vertical mounting float switch has a body material of polypropylene and gasket material of nitrile. It has a 240VAC voltage rating with 600mA current rating. The switch action may be reversed by removing the float, inverting ...
Cynergy3 offers wide range of horizontal switches which ...
Description:
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The ...
The Gems Sensors float switch is designed for ...
Description:
The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. It has mounting thread G1/8in. Operating pressure is 20barDepth of immersion is 21mmMin SG of liquids ...