ATMI Cable Mount Copolymer Polypropylene Float Switch, Float, 10m Cable, SPDT, 400V ac Max, 250V dc Max
- RS-stocknr.:
- 208-5472
- Fabrikantnummer:
- BIPSTOPVRNE10M
- Fabrikant:
- ATMI
- RS-stocknr.:
- 208-5472
- Fabrikantnummer:
- BIPSTOPVRNE10M
- Fabrikant:
- ATMI
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- FR
Productomschrijving
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV).
Thanks to its wide switching angle of 110°, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 m.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
Thanks to its wide switching angle of 110°, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids.
Also, it can detect the both high and low level in the same tank whose hysteresis does not exceed 1.5 m.
These float level switches are used wherever magnetic level controllers can not be used because of impurities or deposits that may trap the float.
Maximum pressure 3.5 bar
Maximum temperature 85°C
Protection index IP68
Maximum temperature 85°C
Protection index IP68
Specificaties
Kenmerk | Waarde |
---|---|
For Use With | Liquid Level Alarm and Pump Controller |
Device Type | Float |
Mounting Type | Cable Mount |
Switch Output | SPDT |
Body Material | Copolymer Polypropylene |
Cable Length | 10m |
Minimum Operating Temperature | -40°C |
Maximum Operating Temperature | +85°C |
Maximum AC Voltage | 400V |
Maximum DC Voltage | 250V |
Maximum Pressure | 3.5bar |