- RS-stocknr.:
- 339-3349
- Fabrikant:
- RS PRO
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
270 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 5)
€ 1,732
(excl. BTW)
€ 2,096
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
5 - 45 | € 1,732 | € 8,66 |
50 - 245 | € 1,586 | € 7,93 |
250 - 495 | € 1,408 | € 7,04 |
500 - 1245 | € 1,22 | € 6,10 |
1250 + | € 1,04 | € 5,20 |
*prijsindicatie |
- RS-stocknr.:
- 339-3349
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- KR
Productomschrijving
T16 (16mm) Tubular SES (E14)
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Specificaties
Kenmerk | Waarde |
---|---|
Voltage Rating | 130 V |
Wattage | 5 W |
Lamp Base | E14 |
Current Rating | 38 mA |
Diameter | 16mm |
Lamp Size | T16 |
Length | 35 mm |
Lens Colour | Clear |
Luminosity | 40 lm |
Life Hours | 2000h |