Wire Terminal Indicator Light, Clear, 5 V, 115 mA, 40000h

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: KR
Productomschrijving

T-1 (3mm) Wire-Ended

A range of T-1 (3mm) wire ended filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.

Wire-Ended & Bi-Pin

Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Specificaties
Kenmerk Waarde
Voltage Rating 5 V
Lamp Base Wire Terminal
Current Rating 115 mA
Diameter 3.05mm
Lamp Size T1
Length 41.35 mm
Lens Colour Clear
Luminosity 1.9 lm
Life Hours 40000h
500 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
830 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,68
(excl. BTW)
0,82
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
0,68 €
6,80 €
250 - 990
0,587 €
5,87 €
1000 - 4990
0,496 €
4,96 €
5000 - 9990
0,404 €
4,04 €
10000 +
0,313 €
3,13 €
*prijsindicatie
Related Products
A range of T-1 1/4 (4mm) Bi-pin filament ...
Description:
A range of T-1 1/4 (4mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc. Body colour coding: White (6V), Yellow (12V), Green (24V), 14V and 28V colour coding not applicable.
Filament lamps will perform to specification and give ...
Description:
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is ...
Filament lamps will perform to specification and give ...
Description:
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is ...
Suitable for instrumentation and general industrial applications. ...
Description:
Suitable for instrumentation and general industrial applications.