Wedge Indicator Light, Clear, 14 V, 190 mA, 4000h

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: KR
Productomschrijving

T-3 (10 mm) wedge

A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.

Note

14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ’E’ approved and are therefore suitable for all exterior vehicle and other commercial applications.

Specificaties
Kenmerk Waarde
Voltage Rating 14 V
Lamp Base Wedge
Current Rating 190 mA
Diameter 10.29mm
Lamp Size T3 1/4
Length 27.7 mm
Lens Colour Clear
Luminosity 12.6 lm
Life Hours 4000h
1350 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,338
(excl. BTW)
0,409
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
0,338 €
3,38 €
250 - 990
0,294 €
2,94 €
1000 - 4990
0,247 €
2,47 €
5000 - 9990
0,203 €
2,03 €
10000 +
0,162 €
1,62 €
*prijsindicatie
Related Products
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
The TW series from Idec features a traditional ...
Description:
The TW series from Idec features a traditional NEMA style switch. Modular construction with Snap-on contacts allows for great flexibility in configuration. Models include illuminated or non-illuminated pushbuttons, pilot lights, selectors, key switches and emergency stop switches. Corrosion resistant octagonal ...
Chromed bezel lampholders, available with flat or domed ...
Description:
Chromed bezel lampholders, available with flat or domed lens. Rear access to lamp. Ratings: Max. voltage between contacts, 150V; max. voltage between contacts and case 500V; max. Compatible with all our transformer indicator lampholders except BA9s typesØ28.5mm chromed brass bezel5mm ...
Square or rectangular switches and matching indicators with ...
Description:
Square or rectangular switches and matching indicators with 110 (0.110in) terminalsIllumination is by 6mm wedge bulbs, square types have one lamp circuit, rectangular have twoDPDT momentary or latching actionIlluminated or non-illuminatedIntegral lamp puller for easy removal of the bulb.