E10 Indicator Light, Clear, 1.25 V, 250 mA, 10h

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: KR
Productomschrijving

G-3 (11mm) Round MES

Screw (LES, MES, SES)

Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.

Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).

Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.

Specificaties
Kenmerk Waarde
Voltage Rating 1.25 V
Lamp Base E10
Current Rating 250 mA
Diameter 11.5mm
Lamp Size G3 1/2
Length 25 mm
Lens Colour Clear
Luminosity 1 lm
Life Hours 10h
200 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,727
(excl. BTW)
0,88
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
0,727 €
7,27 €
100 - 490
0,639 €
6,39 €
500 - 2490
0,549 €
5,49 €
2500 - 4990
0,461 €
4,61 €
5000 +
0,372 €
3,72 €
*prijsindicatie
Related Products
A range of T-3 1/4 (10mm) wedge base ...
Description:
A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.
A range of T-1 3/4 (6mm) Bi-pin filament ...
Description:
A range of T-1 3/4 (6mm) Bi-pin filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
Filament lamps will perform to specification and give ...
Description:
Filament lamps will perform to specification and give optimum life when:a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.b) Ambient temperature is in the range 20°C to 25°C.c) No mechanical vibration is present.Deviations from ...
Filament lamps fitted with an optic at one ...
Description:
Filament lamps fitted with an optic at one end.Ideal for applications in which a narrow, concentrated beam of light is required.