Telegartner 6 Port LC Multimode Duplex Fibre Optic Patch Panel With 6 Ports Populated

  • RS-stocknr. 773-9452
  • Fabrikantnummer H82050F0005
  • Fabrikant Telegartner
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

STX Mounting Rail Distributors

The STX Mounting Rail Distributors are available for either loose-tube, mini-breakout or breakout cables of up to 12 fibers using splice techniques or for fiber optic adaptors using pre-assembled fiber optic links. Fiber optic adaptor types including ST, SC Duplex, SC-RJ, LC Duplex, E2000 and E2000 Compact can be installed in the interchangeable front panel.

The installer can flexibly feed the cables from three directions while easily maintaining minimum bending radii using a storage reserve with additional cable retainers. Versions with pre-assembled adaptors are already available for mini-breakout and breakout cables. For loose-tube cables, the distributors are supplied with ready-to-splice, coloured pigtails and cable strain relief.

For generic cabling in control cabinets, Telegärtner offers outlets and distributors which can be mounted directly next to one another on the mounting rail. They form the ideal connection between the arriving installation lines and the wiring inside the control cabinet. The components can be quickly and easily mounted on conventional TH 35 rails by simply clicking them in place.

Specificaties
Kenmerk Waarde
Connector Type LC
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
277,90
(excl. BTW)
336,26
(incl. BTW)
Aantal stuks
Per stuk
1 +
277,90 €
Related Products
The panels have 16 x 24mm holes to ...
Description:
The panels have 16 x 24mm holes to accept the XLR-format feedthrough connectors with options of threaded M3x0.50 or #4-40 UNC mounting bushes. A connector labelling strip is located on the front and a cable strain-relief bar is fitted at ...
A long frame audio plug from Switchcraft. Tarnishing ...
Description:
A long frame audio plug from Switchcraft. Tarnishing and corrosion vastly reduced due to Nickel plating on plug fingers. Easy to use solder cups and terminals. All models are highly reliable and excellent quality.
DIN rail distribution board of the FDX 20 ...
Description:
DIN rail distribution board of the FDX 20 series, equipped with 6x LC duplex couplings, splice holder (for separately sold shrink und crimp splice protection) on a patented splice comb made from powder-coated sheet steel. Cable insertion via cable gland ...
DIN rail splice box of the FDX 20 ...
Description:
DIN rail splice box of the FDX 20 series, equipped with 6x SC duplex couplings, fully assembled and ready for splicing, with pre-assembled 900 μm pigtails (OM2) and splice holder (for separately sold shrink und crimp splice protection) on a ...