Amphenol Socapex SMA Multimode Fibre Optic Connector 50/125 μm, 62.5/125 μm Fibre Size

  • RS-stocknr. 458-954
  • Fabrikantnummer 905-405-5117
  • Fabrikant Amphenol
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

SMA 905-style Connectors and Accessories

One of the most widely used fibre optic components, this industry-standard connector is suitable for use with both 50/125mm and 62.5/125mm multimode fibres. Use of ceramic ferrules results in much enhanced performance with lower insertion losses and rotational sensitivity. Two options are offered for use with either 2.5mm or 3.0mm outside diameter tight buffered cable. An in-line adaptor for coupling two cables together is also available. All the essential termination tooling is available in this section and the simple termination procedure is outlined in an data sheet.

Note

This recommended tooling is not supplied by Amphenol. Ferrule inner diameter 128 +2, -0 μm.

Specificaties
Kenmerk Waarde
Series 905
Connector Type SMA
Single/Multimode Multimode
Fibre Size 50/125 μm, 62.5/125 μm
Jacket Diameter 2.5mm
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
17,39
(excl. BTW)
21,04
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
17,39 €
15 - 49
16,40 €
50 +
15,49 €
Related Products
A range of Simplex (single), Duplex (dual) and ...
Description:
A range of Simplex (single), Duplex (dual) and Pigtail (single) multimode optical fibre connectors commonly used in telecoms distribution rooms and local area networks. For use with OM1, OM2 and OM3 fibre.
A range of Simplex (single), Duplex (dual) and ...
Description:
A range of Simplex (single), Duplex (dual) and Pigtail (single) multimode optical fibre connectors commonly used in telecoms distribution rooms and local area networks. For use with OM1, OM2 and OM3 fibre.
From the trusted RS Pro brand, a series ...
Description:
From the trusted RS Pro brand, a series of SC field installable connectors (FIC). These fibre optic connectors are factory terminated and polished which allow for fast and reliable connections. The superior quality fibre connectors require no epoxy polishing or ...
ST field installable connectors (FIC) are factory terminated ...
Description:
ST field installable connectors (FIC) are factory terminated and polished to make fibre terminations fast, easy and reliable. These fibre optic connectors offer terminations in less than 2 minutes without any difficulty and require no epoxy, polishing or crimping. The ...