Startech Multi Mode Fibre Optic Cable MTP/MPO to LC 50/125μm 10m

  • RS-stocknr. 186-1650
  • Fabrikantnummer MPO8LCPL1M
  • Fabrikant Startech
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

MPO8LCPL1M Fibre Cable

This MPO/MTP to 8x LC breakout cable lets you fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ transceiver to four 10Gbps LC SFP+ transceivers.

The push-and-pull tabs optimize accessibility and let you install or remove the connectors with one hand, without using additional tools. Plus, the slim uniboot design of the LC connectors saves space and improves cable management.

The MPO cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is required.

Each OM3 fibre cable has been individually tested for insertion loss and return loss. The full test report is included in each cable bag.

The MPO8LCPL1M from StarTech.com is backed by a lifetime warranty.

Features & Benefits

• Obtain higher port density with eight LC network connections combined into a single MPO/MTP connector
• Optimize accessibility and install or remove connectors with one hand using the push-and-pull tabs
• Save space and improve cable management with slim uniboot connectors
• Get test data for your fiber cable - an insertion loss and return loss test report is included in each cable bag

Applications

• Use in 10/40 Gigabit Ethernet and fiber channel applications
• Fan out a single 40Gbps MPO/MTP connection to four 10Gbps LC connections on devices such as fiber patch panels, hubs, switches, media converters, and routers
• Used with 40GBase-SR4 networking hardware

What’s in the package?

• fibre optic cable

FAQs

What is the difference between Multi-Mode and Single Mode fibre cables?
Multi-mode: this type of fibre cable is designed with a larger core to carry multiple light rays or modes at the same time and made of glass fibres. Multi-mode fibre is usually used to transmit modes over shorter distances, typically, less than 1km as these modes can scatter over longer paths. Multi-mode Fibre core diameters are usually 50,62.5 and 100 micrometers.

Single-mode: this type of fibre cable has a smaller core size. Usually up to 10microns and designed for light to travel down a single path for much longer distances, usually of up to 100km. Single-mode transmits a higher bandwidth than multi-mode fibre cables but needs a narrow light source spectral.

Specificaties
Kenmerk Waarde
Length 10m
Propagation Mode Multi Mode
Terminated/Unterminated Terminated
Connector A MTP/MPO
Connector B LC
Core Diameter 50/125µm
Sheath Colour Light Blue
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
249,60
(excl. BTW)
302,02
(incl. BTW)
Aantal stuks
Per stuk
1 +
249,60 €
Related Products
Tightly buffered distribution cables are designed for internal ...
Description:
Tightly buffered distribution cables are designed for internal applications in trunking, under floor or ceiling spaces. Multi-mode optical cables, suitable for use in Local Area Network applications. Capable of handling the growing requirements for computers to manipulate and transfer data ...
Loose tube fibre optic cable is designed for ...
Description:
Loose tube fibre optic cable is designed for external and internal duct applications. Campus environments and intra-buildings can also use this cable.High quality, multi-mode optical cables, suitable for use in Local Area Network applications. Capable of handling the growing requirements ...
Flex Fiber Connector to LC type Connector no ...
Description:
Flex Fiber Connector to LC type Connector no cable options, or pre-terminated from 5M - 450M availableSimplex LC type fiber connectorChoices of OS1, OM1 and OM3 cables for single or multimodePXP4081 Sealing Cap available separately to maintain IP rating of ...
Flex Fiber Connector to Flex Inline Fiber Connector ...
Description:
Flex Fiber Connector to Flex Inline Fiber Connector no cable options, or pre-terminated from 5M - 450M availableSimplex LC type fiber connectorChoices of OS1, OM1 and OM3 cables for single or multimodePXP4081 Sealing Cap available separately to maintain IP rating ...