RS PRO Splice Protector for use with Optical Network Unit

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

RS Pro Splice Protectors

A series of superior quality fusion splice sleeves from RS Pro. These optical fusion splice protectors are designed to protect fibre optic cables after fusion splicing. The splice protectors have a cross linked polyolefin outer tube and a 301 grade stainless steel rod. The clear splices have a 2.5mm OD recovery after shrinking and are available in 45 mm and 60 mm lengths.
Part number 121-4189 60 mm
Part number 121-4190 45 mm

Features and Benefits

Provides strength and protection
Maintains optical properties of the fibres
Sealant protects splice
Easy to use and install
Clear sleeve allowing visual location of splice before shrinking

Specificaties
Kenmerk Waarde
Accessory Type Splice Protector
Length 60mm
Width 2.5 (Dia.)mm
For Use With Optical Network Unit
300 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7800 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,163
(excl. BTW)
0,197
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 900
0,163 €
16,30 €
1000 - 1900
0,148 €
14,80 €
2000 - 4900
0,139 €
13,90 €
5000 - 9900
0,131 €
13,10 €
10000 +
0,123 €
12,30 €
*prijsindicatie
Related Products
Hot Melt ST, SC and LC fibre optic ...
Description:
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre ...
1 and 3RU frames with space saving designIdeal ...
Description:
1 and 3RU frames with space saving designIdeal for cramped rack applications such as OB truck I/O panels Best cable bend protection for mated cables due to 45° angled outlet positionFrames can be equipped with different plates.
Fibre applications as drop down or stage boxes ...
Description:
Fibre applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. This sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of ...
Rubber coated, pollutant-protection cover for opticalCON cable connectors ...
Description:
Rubber coated, pollutant-protection cover for opticalCON cable connectors Includes front housingErgonomic rubber boot can be safely locked with the spring loaded push/pull mechanism of the cable connector front Protects the fibre ferrules of any contamination especially during spooling of cables ...