Hirose Crimp Extraction Tool for HR12 Series Pin Contact, Contact size 30 → 26AWG

  • RS-stocknr. 790-5218
  • Fabrikantnummer HR12-SC-TP
  • Fabrikant Hirose
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Hirose HR10/HR12 Series Tooling

A series of tools tools suitable for use with the HR10 series push-pull connectors, including two hand crimp tools and an extraction tool which is suitable for HR12 Series socket contacts.
Crimp tool stock number 772-7112 (HR10-TC-01) is for use with cable types HR10B-2.5CP and HR10B-2.5CJ
Crimp tool stock number 772-7115 (HR10A-TC-02) is for use with Ø 5mm or Ø 7mm cables

Specificaties
Kenmerk Waarde
Contact Type Pin
Contact Size 30 → 26AWG
Series HR12
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,37
(excl. BTW)
13,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
11,37 €
10 +
10,24 €
Related Products
A locator on the tool positions contacts in ...
Description:
A locator on the tool positions contacts in the tool jaws to give an easy consistent crimp action.,A contact extraction tool is also available for servicing connectors during maintenance and modifications. Operating instructions are included with both tools. The crimp ...
Suitable for QM single and two piece contacts. ...
Description:
Suitable for QM single and two piece contacts. Plier tool can also be used to crimp contacts for the Circular Sealed Industrial IP67 connector range and the Sealed Industrial IP68 connector range stock no. 489-526. Instructions supplied with tools. RF ...
A range of 1.57mm Diameter Standard .062" Pin ...
Description:
A range of 1.57mm Diameter Standard .062" Pin and Socket Crimp Terminal contacts available as gold-plated or tinned versions for use with receptacles housings stock number 236-2928 typically and for plug housings 236-2984 typically. • Shell Material: Nylon UL 94-V2• ...
An assembly tool for fitting the solder caps ...
Description:
An assembly tool for fitting the solder caps into right angle MCX plugs. Fitting instructions: position the cap in the connector body. Slide the assembly tool onto the body grooves of the connector. Turn the tool handle to press fit ...