- RS-stocknr.:
- 508-728
- Fabrikantnummer:
- 09-3817
- Fabrikant:
- Vero Technologies
- RS-stocknr.:
- 508-728
- Fabrikantnummer:
- 09-3817
- Fabrikant:
- Vero Technologies
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
64-Way Standard Extender Board
Double-sided extender boards for testing Eurocards. The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test.
DIN 41612 type B connectors
Solder resist coating to prevent solder bridging and finger staining
Solder resist coating to prevent solder bridging and finger staining
Supplied with
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels)
PC / VME Bus Boards
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Microboard Pattern
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
Specificaties
Kenmerk | Waarde |
---|---|
Type | Extender Board |
Connection | DIN 41612 |
Number of Contacts | 64 |
Base Material | Epoxy Glass Fabric Laminate |
Number of Sides | 2 |
Dimensions | 281.6 x 100 x 1.6mm |
FR Material Grade | FR4 |
Length | 281.6mm |
Thickness | 1.6mm |
Width | 100mm |