- RS-stocknr.:
- 122-4831
- Fabrikantnummer:
- KSZ8061MNXI
- Fabrikant:
- Microchip
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Toegevoegd
Prijs Per stuk (in een verpakking 4)
€ 1,555
(excl. BTW)
€ 1,882
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
4 - 16 | € 1,555 | € 6,22 |
20 - 44 | € 1,428 | € 5,712 |
48 - 196 | € 1,393 | € 5,572 |
200 + | € 1,355 | € 5,42 |
*prijsindicatie |
- RS-stocknr.:
- 122-4831
- Fabrikantnummer:
- KSZ8061MNXI
- Fabrikant:
- Microchip
Datasheets
Wetgeving en conformiteit
Productomschrijving
KSZ8061M 10/100 Ethernet Transceiver
The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Features
Quiet-WIRE® Programmable EMI Filter
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Ethernet Communications - Microchip
Specificaties
Kenmerk | Waarde |
---|---|
IC Type | Transceiver IC |
Data Rate | 10 Mbps, 100Mbps |
Number of Transceivers | 1 |
Standard Supported | IEEE 802.3az |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 32 |
Typical Operating Supply Voltage | 3.3 V |
Dimensions | 5 x 5 x 0.95mm |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |