TE Connectivity Male Telephone Connector, 50 Series,, 8 Way Crimp Termination

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity 50 Series Round Cable SDL Plug Connectors

The SDL (Shielded Data Link) connector meets industry's demand for a cost effective shielded connector. This connector provides EMI/RFI protection for a wide range of applications from critical medical systems to point-of-sale equipment, including computers, computer peripherals, video games and process control equipment.
These 50 series round cable SDL IDC plug connectors are for use with round shielded 7 stranded cable and are pre-loaded with IDC contacts on a 1.27mm centreline. The housing design of these SDL IDC plug connectors features locking latches, positve polarization, a primary strain relief that is applied to the cable foil or shield and a secondary strain relief for the main cable conductors. The top and bottom shielding shells and ferrules for these SDL IDC plug connectors must be purchased separately.
Stock number 717-4414 is a 4 way SDL plug for use with 24 AWG wire
Stock number 820-8221 is a 4 way SDL plug for use with 28-26 AWG wire
Stock number 820-8176 is an 8 way SDL plug for use with 24 AWG wire
The 4 way SDL plugs use top shield (stock number 717-4423), bottom shield (stock number 717-4426) and ferrule (stock number 717-4432)

Specificaties
Kenmerk Waarde
Connector Type Shielded Data Link
Gender Male
Number of Ways 8
Mounting Type Cable Mount
Termination Method Crimp
Contact Plating Gold over Nickel
Contact Material Copper Alloy
Housing Material PC
Wire Size 26 → 24 AWG
Colour Grey
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
Series 50
54 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,33
(excl. BTW)
2,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
2,33 €
Related Products
TE Connectivity Universal Mate-N-Lok connector wire seals essentially ...
Description:
TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board ...
EP 2.5 TPA (Terminal Position Assurance) retainers for ...
Description:
EP 2.5 TPA (Terminal Position Assurance) retainers for use with EP TPA receptacle housings. These TPA retainers ensure that the contacts are fully inserted into the housing and prevent them from backing out due to vibration. A locking latch on ...
Lightweight constructionGlass filled thermoplastic moulding with 450mm yellow ...
Description:
Lightweight constructionGlass filled thermoplastic moulding with 450mm yellow PFTE lead terminationsSlightly smaller than metal shell type.
Micro-MaTch Male-on-Board PCB header connectors for use in ...
Description:
Micro-MaTch Male-on-Board PCB header connectors for use in both vertical and right angle board to board and wire to board interconnections. The Micro-MaTch range of connectors have a compact, space saving design with a 1.27mm pitch. The female contacts of ...