Connecting ESD Grounding Cord 10mm, 3.6m Coiled

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: PH
Productomschrijving

RS PRO Coiled Cords

In every ESD (electrostatic discharge) environment grounding is essential for blocking ESD. This coiled cord from our own RS PRO brand will safely direct static electricity to the ground. This will protect workers and equipment in an environment where sensitive electronic equipment is used, manufactured, assembled or repaired.

Features and Benefits

• High visibility - bright colours allow the supervisor to see that worker is wearing a wrist strap
• Eliminates intermittent failures that occur with less durable single and dual wire cords
• Rapid retraction strength polyurethane coil cord which provides high memory and less coil cord dragging on the work surface
• Relaxed retraction - will not interfere with your movements
• Improved snap design - stronger strain relief and snap retention for long life; low profile keeps the cord from being disconnected
• High-quality long-life yellow coil cord
• Integral 1MΩ, 2MΩ or 4MΩ resistor
• Soft polyurethane strain relief

Always remember!

• Test the ground before you use it
• Keep a room clean
• Test the wrist strap - best to test the strap is while it is worn
• Each individual workstation must be individually grounded to the ground bus or to the nearest equipment ground

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Note

Wrist bands and cords must be ordered separately.

Standards

Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance

Specificaties
Kenmerk Waarde
Cord Type Connecting
Termination Type Press Stud - Banana Plug/Croc Clip
Stud Size 10mm
Cord Length 3.6m
Cord Style Coiled
Lead Resistance 2MΩ
Colour Yellow
Complies with EN 61340-5-1 Yes
41 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
212 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 17,51 €
15,34
(excl. BTW)
18,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
15,34 €
10 - 19
14,73 €
20 +
14,26 €
Related Products
System comprises continuous monitor with 2 satellite modules. ...
Description:
System comprises continuous monitor with 2 satellite modules. Control unit can be mounted at eye level, where it will not impede worksurface areaControl unit LEDs indicate proper grounding of 2 mats/2 operators and continuously display grounding statusThe satellite (remote) monitors ...
The most efficient way of ensuring optimum personal ...
Description:
The most efficient way of ensuring optimum personal grounding is to employ the combination of ESD footwear and ESD matting. Smooth conductive floor mat, very highly resistant to wear and abrasion, which make it ideal for use in work areas ...
Dual wire wrist strap from Menda. Dual wire ...
Description:
Dual wire wrist strap from Menda. Dual wire wrist strap provides redundancy - even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire. Used with resistive loop technology to continuously monitor and verify ...
These coiled ground wires from RS offer 2.5 ...
Description:
These coiled ground wires from RS offer 2.5 mm polyurethane insulation along with one megaohm resistors in socket ends.The grounding wires can withstand 1250 V dc for at least one minute and feature a high-strength conductor for flexibility and strength. ...