FLUKE-17xx iFlexi 3000A 24 IN Energy Monitor Clamp, For Use With Fluke 1730 Energy Logger

  • RS-stocknr. 900-9992
  • Fabrikantnummer FLUKE-17xx iFlexi 3000A 24 IN
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: BG
Productomschrijving

Fluke i17XX-flex3000 iFlex® Current Clamp

The Fluke 17XX 24 inch iFlex flexible current probes expand the measurement range of the Fluke 17XX Energy or Power Logger to 3000 A ac while providing the ultimate measurement flexibility.

The iFlex probes connect directly to the logger, displaying current measurements without error prone scaling factors
The 1.8 m cord allows separation between the measurement location and the energy logger making it easier to view the display

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specificaties
Kenmerk Waarde
Accessory Type Current Clamp
For Use With Fluke 1730 Energy Logger
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
181,00
(excl. BTW)
219,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
181,00 €
Related Products
The Fluke AC current clamp has a dual ...
Description:
The Fluke AC current clamp has a dual current rating of 0.1A to 24A and 0.5A to 240A with voltage output via a BNC connector. A dual banana to BNC adapter is supplied to allow the clamp to be connected ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
The i310s Current Clamp has been designed for ...
Description:
The i310s Current Clamp has been designed for use with oscilloscopes and digital multimeters for accurate nonintrusive measurement of AC, DC and complex waveform currents. Using Hall Effect technology, the clamp can accurately measure currents up to 450 A peak ...
The Carlo Gavazzi ROG2K current sensor based on ...
Description:
The Carlo Gavazzi ROG2K current sensor based on the Rogowski principle, to be used in combination with the EM210 analyser to measure current in single-phase, two-phase and three-phase systems. The length of the coil is 250mm. Compact, flexible and lightweightImproved ...