Siemens 3 Phase LCD Digital Power Meter, 90mm Cutout Height

  • RS-stocknr. 171-7874
  • Fabrikantnummer 7KM2200-2EA40-1CA1
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

Siemens Digital Power Meter

The Siemens digital power meter is a 3-phase standard rail instrument with a graphical display and integrated webserver for acquiring important measured values to evaluate the plant state and power quality. This meter is also suitable for direct measurement voltage rating up to 480V (UL-L, CATIII) and current rating up to 65A (CATIII).

Features and Benefits

• M-bus interface
• An expansion module is not required
• Compact design, directly In the control panel
• Worldwide use
• Interface to the power monitoring system
• Low mounting depth
• Free, intuitive configuration software
• Interface possible to power monitoring software
• Simple mounting and commissioning on a standard mounting rail

Certifications

• CE Approved
• EAC Approved

Specificaties
Kenmerk Waarde
Cutout Height 90mm
Cutout Width 107.8mm
Display Type LCD
Number of Phases 3
Depth 71.4mm
Meter Type Digital
Maximum Measurement 1 MΩ, 65 A, 65 Hz, 400 V ac
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
312,30
(excl. BTW)
377,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
312,30 €
Related Products
The ND10 is a digital programmable power meter ...
Description:
The ND10 is a digital programmable power meter designed to measure 3 phase, 4-wire power network parameters in both balanced and unbalanced systems. It displays measured quantities and their simultaneous digital transmission. The power meter also controls and optimises the ...
Measure the modular way! DMED301 is the new ...
Description:
Measure the modular way! DMED301 is the new energy meter of the DMED series, suitable for 3ph systems, direct connected up to 80A c/w RS485. Monitoring and supervision of measures such as: total and partial active energy, total and partial ...
The Siemens SENTRON PAC3200 series power monitoring device ...
Description:
The Siemens SENTRON PAC3200 series power monitoring device allows measuring electrical parameters such as voltage, current, powers, energy values, frequency, power factor and asymmetry. It operates on a supply voltage ranging between 110VDC and 340VDC. This panel mount device can ...
The Socomec Countis E53 series 3-phase digital power ...
Description:
The Socomec Countis E53 series 3-phase digital power meter allows measuring electrical parameters such as voltage, current, active power, reactive power, apparent power and power factor with a measurement range of 86VAC to 520V, 3mA to 6A. This panel mount ...