Analog Devices ADE7878AACPZ Energy Meter IC, 24 bit, 40-Pin LFCSP

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: KR
Productomschrijving

ADE7854/7858/7868/7878 Series, Polyphase Multifunction Energy Metering IC, Analog Devices

The ADE7854, ADE7858, ADE7868, and ADE7878 from Analog Devices are high accuracy, 3-phase electrical energy measurement ICs with serial interfaces and three flexible pulse outputs.

Incorporated into these devices are second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition these ICs have the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.

Features

Highly accurate – supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards
Compatible with 3-phase, 3 or 4-wire (delta or wye), and other 3-phase services
Supports current transformer and di/dt current sensors
Supplies sampled waveform data on all three phases and on neutral current
Selectable no load threshold levels for total and fundamental active and reactive powers, as well as for apparent powers
Battery supply input for missing neutral operation
Phase angle measurements in both current and voltage channels with a typical 0.3° error
Flexible I2C, SPI, and HSDC serial interfaces
Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C
Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C

Energy/Power Measurement - Analog Devices

Specificaties
Kenmerk Waarde
Resolution 24 bit
Conversion Rate 8ksps
Mounting Type Surface Mount
Package Type LFCSP
Pin Count 40
Dimensions 6.1 x 6.1 x 0.75mm
Length 6.1mm
Width 6.1mm
Height 0.75mm
Maximum Operating Supply Voltage 3.7 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 2.8 V
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/12/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 490)
8,065
(excl. BTW)
9,759
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
490 +
8,065 €
3.951,85 €
*prijsindicatie
Related Products
The ND10 is a digital programmable power meter ...
Description:
The ND10 is a digital programmable power meter designed to measure 3 phase, 4-wire power network parameters in both balanced and unbalanced systems. It displays measured quantities and their simultaneous digital transmission. The power meter also controls and optimises the ...
The Acti 9 iEM3000 Energy Meter Series offers ...
Description:
The Acti 9 iEM3000 Energy Meter Series offers a range of DIN rail-mounted energy meters ideal for sub-billing and cost allocation applications.Combined with communication systems, like Smart Link, the Acti 9 iEM3000 Series makes it easy to integrate electrical distribution ...
EMpro energy meters are efficient, network-capable and can ...
Description:
EMpro energy meters are efficient, network-capable and can be used to acquire and monitor the characteristic electrical data of your machines and systems.These energy meters are the ideal solution for your energy management: they can be freely extended with communication ...
DMG 800 digital multimeter are capable of viewing ...
Description:
DMG 800 digital multimeter are capable of viewing the measurements with high accuracy on the wide graphic LCD, which allow to control energy distribution networks. Flush-mount housing, 96 x 96 mmGraphic LCD display, 128 x 80 pixelKeyboard with 4 keys ...