Analog Devices ADE7880ACPZ Energy Meter IC, 40-Pin LFCSP WQ

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

ADE7880, Polyphase Multifunction Energy Metering IC, Analog Devices

The ADE7880 from Analog Devices is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The device incorporates second-order sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), a digital integrator and reference circuitry. In addition this device has the signal processing required to perform energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this processing, with the DSP program being stored in the internal ROM memory.

Features

Highly accurate – supports IEC 62053-21, IEC 62053-22, IEC 62053-23, EN 50470-1, EN 50470-3, ANSI C12.20, and IEEE1459 standards
Supports IEC 61000-4-7 Class I and Class II accuracy specification
Compatible with 3-phase, 3 or 4-wire (delta or wye) and other 3-phase services
Supplies rms, active, reactive and apparent powers, power factor, THD, and harmonic distortion of all harmonics within 2.8 kHz pass band on all phases
Supplies rms and harmonic distortions of all harmonics within 2.8 kHz pass band on neutral current
Battery supply input for missing neutral operation
Reference: 1.2 V (drift 10 ppm/°C typical) with external overdrive capability
Less than 1% error in harmonic current and voltage rms, harmonic active and reactive powers over a dynamic range of 2000 to 1 at TA = 25°C
Less than 0.1% error in active and fundamental reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
Less than 0.2% error in active and fundamental reactive energy over a dynamic range of 5000 to 1 at TA = 25°C
Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C

Typical applications

Energy metering systems
Power quality monitoring
Solar Inverters
Process monitoring
Protective devices

Energy/Power Measurement - Analog Devices

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Package Type LFCSP WQ
Pin Count 40
Dimensions 6.1 x 6.1 x 0.75mm
Length 6.1mm
Width 6.1mm
Height 0.75mm
Maximum Operating Supply Voltage 3.7 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 2.4 V
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12/01/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 490)
8,868
(excl. BTW)
10,73
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
490 +
8,868 €
4.345,32 €
*prijsindicatie
Related Products
RS Pro digital panel meters measure important electrical ...
Description:
RS Pro digital panel meters measure important electrical parameters in 3 phase 4-wire and 3 phase three wire network and replaces the need for multiple analogue meters. It measures electrical parameters such as AC voltage, AC current, Frequency, Active, Reactive ...
The N43 from Sifam Tinsley is a programmable ...
Description:
The N43 from Sifam Tinsley is a programmable power meter assembled on a DIN Rail that is designed to measure 3 phase, 3 or 4-wire power network parameters. The parameters can be measured in both balanced and unbalanced systems. The ...
The Acti 9 iEM3000 Energy Meter Series offers ...
Description:
The Acti 9 iEM3000 Energy Meter Series offers a range of DIN rail-mounted energy meters ideal for sub-billing and cost allocation applications.Combined with communication systems, like Smart Link, the Acti 9 iEM3000 Series makes it easy to integrate electrical distribution ...
DMG 800 digital multimeter are capable of viewing ...
Description:
DMG 800 digital multimeter are capable of viewing the measurements with high accuracy on the wide graphic LCD, which allow to control energy distribution networks. Flush-mount housing, 96 x 96 mmGraphic LCD display, 128 x 80 pixelKeyboard with 4 keys ...