Baumer IVO Encoder Wheel Circumference 20cm, 10mm Wheel Bore Aluminium

  • RS-stocknr. 481-7644
  • Fabrikantnummer MR211.10A
  • Fabrikant Baumer
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Coder accessories

Measuring wheels

Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.

Mounting bracket Z 119.017

For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.

Mounting base Z 119.015

For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.

Eccentrics Z 119006

For synchro flange coders.
3 eccentrics are needed to fit the coder.

Kubler

Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation

Specificaties
Kenmerk Waarde
Wheel Circumference 20cm
Bore Size 10mm
Material Aluminium
Surface Pattern Knurled
Series MR211
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
38,31
(excl. BTW)
46,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
38,31 €
5 - 9
36,78 €
10 +
35,26 €
Related Products
Cast aluminium bodyFor use with 10mm diameter shaftsLong ...
Description:
Cast aluminium bodyFor use with 10mm diameter shaftsLong lasting treadRubber tread for good grip, low wearPlastic tread for greasy metals and steel sections.
Sturdy cast aluminium body compatible with both top ...
Description:
Sturdy cast aluminium body compatible with both top coming and top going mechanical counters. Suitable for measuring wire and cable up to 15mm diamaterContinuous operation up to 300m/minCompatible with Trumeter top coming ( RS Stock No's 815-8368 & 815-8374 ) ...
Trumeter plastic measuring wheel with a rubber covered ...
Description:
Trumeter plastic measuring wheel with a rubber covered finish. Supplied with a 16mm width500mm circumferenceCompatible with Trumeter 3602 series of counters (815-8346, 815-8340, 815-8378 & 815-8374).
Multiturn rotary encoder in shaft designWith contact-free multiturn ...
Description:
Multiturn rotary encoder in shaft designWith contact-free multiturn level and new intelligent sensing technology (I-S-T)Designed with Integrative Technology®4 (programmable) outputsResolution up to 8192 (13 Bit) per revolution, 4096 (12 Bit) revolutions, corresponds to 25 BitThe following parameters can be ...