ClimaSys CC - thermostat - à fermeture -

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Vigirex relays with associated toroid sensors measure the leakage current in an electrical installation to detect levels that may be damaging. Ideal for protection or alarming, the products offer multiple setting and mounting possibilities.

For use on low-voltage AC installations up to 1000 V, and for TT or TN neutral networks
Currents up to 3200 A (depending on sensor)
Closed Toroid – widest range
Split (Open) Toroid – install without disconnecting existing cable
Rectangular sensors – for large bus bars & high currents
Sensitivities from 30 mA to 30 A (with time delay range from 0 to 4.5 s)
Applications with frequencies up to 400 Hz
Immunity to nuisance tripping (tolerance between 0.8 –1 x I ∆n)
Operation guaranteed in less than 40 ms
Overvoltage category IV
Modbus communication (RHU & RMH)

Earth-leakage relay rh10p - 30 ma - 240 v

Specificaties
Kenmerk Waarde
Mount Type Panel
Supply Voltage 220 → 240 V ac
Series Vigirex
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
55,95
(excl. BTW)
67,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
55,95 €
Related Products
KTO 011 (697-4437) thermostat normally closed, contact breaker ...
Description:
KTO 011 (697-4437) thermostat normally closed, contact breaker for regulating heaters.,KTS 011 (697-4446) thermostat normally open, contact maker for regulating filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded. Large setting rangeSmall size ...
This thermostat of temperature class T6 (85 °C ...
Description:
This thermostat of temperature class T6 (85 °C max.) is utilised for the regulation of heaters deployed in areas with explosion hazard. The high switching performance allows direct control of a heater. Compact, small mechanical thermostat offering a high response ...
The electronic thermostat with integrated switch module is ...
Description:
The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit. The external ...
Maintaining constant temperatures in control panels and enclosures, ...
Description:
Maintaining constant temperatures in control panels and enclosures, the 7T panel thermostat suits the needs of both simple and sophisticated heating and ventilation systems with dedicated heating and ventilation versions. Helping to improve component reliability and preserve instrumentation accuracy through ...