Enclosure Heater, 400W, 230 V ac, 90 x 85 x 111mm

  • RS-stocknr. 697-4409
  • Fabrikantnummer 02810.0-00
  • Fabrikant STEGO
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Compact Fan Heaters CS/CSL 028 Series

Prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. Connected using internal terminal connectors.

Small, compact design ideal for use where space is at a premium
Plastic casing according to UL-94-0, black
Quiet operation
Dynamic heating-up, PTC heating element
At 20°C ambient temperature, maximum surface temperature at casing is 50°C (150W & 250W), 65°C (400W) and at upper protective grille is 100°C
Connection 2-pole clamp max 2.5mm2

,

clamping screw torque 0.8Nm max
Vertical fitting position
Operating/storage temperature -45 to +70°C
IP20/II (double insulated)

Approvals

VDE

DIN Rail Mount Enclosure Heaters

Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Specificaties
Kenmerk Waarde
Output Power 400W
Air Flow 45m³/h
Input Power Rating 400W
Supply Voltage 230 V ac
Depth 111mm
Height 90mm
Width 85mm
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
26 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
101,18
(excl. BTW)
122,43
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
101,18 €
10 - 24
97,75 €
25 - 49
92,60 €
50 - 99
85,71 €
100 +
77,10 €
Related Products
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorMounting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
The Schneider Electric is an enclosure heater that ...
Description:
The Schneider Electric is an enclosure heater that belongs to the ClimaSys CR series. This is a compact resistant heater for prevention of formation of condensation due to low temperature. The mounting dimensions of this heater are 70mm depth, 85mm ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting platePTC technology with ...