Enclosure Heater, 200W, 230 V ac, , 300mm x 80mm x 160mm

  • RS-stocknr. 144-7582
  • Fabrikantnummer 02044.0-10
  • Fabrikant STEGO
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Stego Hazardous Area Compact Heaters, CREx 02 Series

Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment.

Features and Benefits

• For areas with explosion hazard
• Large convection surface
• Clip and screw flange fixing
• Ready-to-use with strain relief
• Maintenance free
• Temperature class T3 (200°C max) 50 W to 250 W
• Temperature class T4 (135°C max) 50 W to 200 W
• Temperature class T5 (100°C max) 50 W to 100 W

Stego Elektrotechnik Enclosure Heater

The Stego Elektrotechnik is a 200W enclosure heater belongs to CREx 020 series. This compact heater of temperature class T4 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. It provides protection against frost in control and switch cabinets and in measuring equipment.

Features and Benefits

• Ambient temperature range between -60°C and 50°C
• Clip and screw flange fixing
• Compact in dimension 160 x 80 x 300mm
• For areas with explosion hazard
• Large convection surface
• Maintenance free
• Ready-to-use with strain relief

Applications

• Hazardous area

Certifications

• CE
• EAC approved
• EPS 16 ATEX 1 109 X
• Ex
• IEC
• IECEx
• IP66 rated

Specificaties
Kenmerk Waarde
Output Power 200W
Input Power Rating 200W
Supply Voltage 230 V ac
Surface Temperature +135°C
Depth 160mm
Height 300mm
Width 80mm
Series CREx 020
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
179,54
(excl. BTW)
217,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
179,54 €
5 - 11
166,97 €
12 - 24
157,98 €
25 - 49
147,19 €
50 +
134,60 €
Related Products
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorFitting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single ...
HVR Pentagon anti-condensation heaters have been designed for ...
Description:
HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There ...
Large surface area, anodised aluminium heaters with long ...
Description:
Large surface area, anodised aluminium heaters with long service life and no mechanical parts. They have class I insulation. Surface mounting clips are available separately. Protected to IP54. Comply with DIN VDE 0700 Part 1 and EN60335/1TropicalisedSelf regulating PCT heating ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.