Enclosure Heater, 250W, 115 V ac, 183.5 x 85 x 104mm

  • RS-stocknr. 103-415
  • Fabrikantnummer FLH250 17025015007
  • Fabrikant Pfannenberg
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Fan Heater - Pfannenberg FLH 250

Plug-in terminal connection
Suitable for both 50Hz and 60Hz
Duty cycle 100%
Heating element is resistance type with temperature monitor
Fitting position is airflow vertical, exit at top
Airflow 50m3/h (50Hz), 61m3/h (60Hz)
Constructed from aluminium extrusion, clear anodised
Binding post connection capacity: single filament 2 x 0.5 - 2.5mm2; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm2
Snap-in mounting for 35mm DIN-rail in accordance with EN 50022
Operating temperature -20°C to +70°C
Storage temperature -40°C to +70°C
Protection rating IP44

Note

Guard (see designation +2) adds 3mm to height dimension quoted
Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600

Approvals

UL

Specificaties
Kenmerk Waarde
Output Power 250W
Air Flow 50 m³/h, 61 m³/h
Supply Voltage 115 V ac
Surface Temperature 70°C
Depth 104mm
Height 183.5mm
Width 85mm
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
99,93
(excl. BTW)
120,92
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
99,93 €
10 - 24
96,55 €
25 - 49
91,46 €
50 - 99
84,64 €
100 +
76,15 €
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Suitable for both 50Hz or 60Hz operationDuty cycle 100%Heating element is PTC (positive temperature coefficient), temperature regulatingCan be ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settingsLightweight and easy to fitHarness length 240mmElectrical Protection Class IIIndependent ...
Prevent formation of condensation and provide an evenly ...
Description:
Prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. Connected using internal terminal connectors. Small, compact design ideal for use where space is at a premiumPlastic casing according to UL-94-0, blackQuiet ...