Enclosure Heater, 45W, 110 → 250 V ac, 65 x 70 x 50mm

  • RS-stocknr. 103-207
  • Fabrikantnummer FLH045 17004505007
  • Fabrikant Pfannenberg
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Radiant Heaters - Pfannenberg FLH Series

Suitable for both 50Hz or 60Hz operation
Duty cycle 100%
Heating element is PTC (positive temperature coefficient), temperature regulating
Can be mounted in any position (vertical preferred)
Made from extruded aluminium section, clear anodised
Plug-in terminal connection
Cable connection capacity: solid 2 x 0.5 - 2.5mm2; fine stranded (tinned, with bootlace ferrule or crimp pin) 2 x 0.5 - 1.5mm2
DIN-rail mounting (EN 50022 35mm)
Operating temperature -20°C to +70°C
Storage temperature -40°C to +70°C
Environmental rating IP20

Note

Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600

Approvals

UL

DIN Rail Mount Enclosure Heaters

Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Specificaties
Kenmerk Waarde
Output Power 45W
Air Flow 50 m³/h, 61 m³/h
Input Power Rating 40W
Supply Voltage 110 → 250 V ac
Surface Temperature 105°C
Depth 50mm
Height 65mm
Width 70mm
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
42 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
34,19
(excl. BTW)
41,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
34,19 €
10 - 24
32,86 €
25 - 49
30,87 €
50 - 99
28,20 €
100 +
24,86 €
Related Products
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorMounting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single ...
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty ...
Description:
Plug-in terminal connectionSuitable for both 50Hz and 60HzDuty cycle 100%Heating element is resistance type with temperature monitorFitting position is airflow vertical, exit at topAirflow 50m3/h (50Hz), 61m3/h (60Hz)Constructed from aluminium extrusion, clear anodisedBinding post connection capacity: single ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
The Schneider Electric is an enclosure heater that ...
Description:
The Schneider Electric is an enclosure heater that belongs to the ClimaSys CR series. This is a compact resistant heater for prevention of formation of condensation due to low temperature. The mounting dimensions of this heater are 90mm depth, 60mm ...