70 W Emergency Light Conversion Kit, 150 x 44 x 35 mm

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Emergency Lighting Kits

Ideal for integrating into existing control gear. Supplied with a fused terminal block and pre-cut connection wires.,The modules can be tuned specifically to the lamp, giving better performance for the cell capacity.

Note

Nominal tube diameter - T5=16mm, T8=26mm, T12=38mm

Conversion Kits

Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.

Specificaties
Kenmerk Waarde
Wattage 70 W
Fixing Centres 140mm
Length 150 mm
Height 35mm
Width 44 mm
23 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
107,94
(excl. BTW)
130,61
(incl. BTW)
Aantal stuks
Per stuk
1 +
107,94 €
Related Products
The RS PRO 3W surface hanging exit sign ...
Description:
The RS PRO 3W surface hanging exit sign has a voltage rating of 240V and a battery made up of Ni-Cad with 3.6V, 900mAh. It is made up of polycarbonate body and acrylate screen. This product has a legend kit ...
The LifeGuard cordless LED multi-functional emergency kit from ...
Description:
The LifeGuard cordless LED multi-functional emergency kit from Nightsearcher, offers several functionalities within one unit. So it can be a floodlight, torch, belt cutter and window breaker, making it a perfect addition for your car. The LifeGuard’s capable of 200 ...
The optimum series of LVDT sensors are high ...
Description:
The optimum series of LVDT sensors are high performance sensors ideal for use in process control and research applications, the 9.52 mm diameter of these sensors make them an ideal choice where space is limited. Large radial bore clearance9.52 mm ...
Supplied with all fittings and fixtures required to ...
Description:
Supplied with all fittings and fixtures required to install any rope pull switch, including hazardous area versionsStainless steel grade 316 and the cable is multi-strand galvanised steel covered with PVCTwo thimbles, collar clamps and "D" shackles are provided for securing ...