Cistermiser Electronic Cistern Control Valve IRC, IRC

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Cistermiser Electronic Flush Control Valve

The Cistermiser flush and flow controller is a robust control valve used to automatically manage the supply of water to a urinal cistern. It has a maximum sensing distance of 4m. it is recessed into a suspended ceiling using the ceiling mounting kit (CMK) that is supplied with the IRC as standard. The unit employs a motion-sensing infrared to control the valve operation and reduce water consumption by over 80%.

Features and Benefits

A connection is 15mm compression female
Battery supply is 4 x 1.5V
Maximum working pressure is 6bar
Normal or economy mode water-saving options
Supplied in a white ABS case design to fit directly on to the solenoid
Supply voltage rating is 230VAC
Surface-mounted using a standard pattress box
The battery is alkaline type LR6 and capacity is 2700mAh
Visible LED status indicator and a low battery alert

Certifications

WRC approved

Approvals

WRC

Specificaties
Kenmerk Waarde
Sensor Type Infrared
Maximum Working Pressure 6 bar
Connection 15 mm Compression Female
Body Material ABS
Supply Voltage 6 V ac
Connection Gender Female
Maximum Sensor Distance 4m
Minimum Sensor Distance 3m
Thread Size 15mm
Thread Standard or Connection Type Compression
Sensor Range 3 → 4m
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
322,15
(excl. BTW)
389,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
322,15 €
Related Products
10 bar Working Pressure at 20°C.,Hand wheel controlled, ...
Description:
10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole. Double union ends with plain bore for solvent cement jointing.
The Set is made-up of a plate, two ...
Description:
The Set is made-up of a plate, two specific male or female threaded brass elbows, screws and pegs. ROBIFIX enables to connect Ø 12 mm and Ø 16 mm PEX pipes with sliding fittings, press fittings or for copper pipe ...
Internal timers can be adjusted after the supply ...
Description:
Internal timers can be adjusted after the supply is isolated without removing the unit. Robust polyamide construction to DIN 43650For controlling RS solenoid valves and others with the same type of terminationProtected to IP65User programmable via built-in DIP switches and ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...