Mitutoyo 571-211-10 Depth Micrometer, 150mm With UKAS Calibration

  • RS-stocknr. 431-886
  • Fabrikantnummer 571-211-20
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

Digital

These three digital depth gauges give measurements in imperial or metric with resolution to 0.0005in. or 0.01mm. It has functions for ± deviation from nominal, instant metric/imperial conversions and an output port for transmission to Mitutoyo SPC data processors. The non-contact linear measuring system is unaffected by electrical interference or magnetism and will compensate for mechanical wear. All gauges are supplied fitted with an SR44 battery (stock no. 593-423).

Specificaties
Kenmerk Waarde
Maximum Measurement 150mm
Calibrated UKAS
Accuracy ±0.001 in
Resolution 0.01 mm
Imperial or Metric Both
Metric-Imperial Conversion Yes
Finish Micro Lapped
Battery Type LR44
Power Source Battery
Model Number p 571-211-10
5 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
552,22
(excl. BTW)
668,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
552,22 €
Related Products
Bosch DTECT120 designed for the detection of objects ...
Description:
Bosch DTECT120 designed for the detection of objects in walls, ceilings and floors. Depending on the material and condition of the base material, it is possible to detect metal objects, joists, water-filled plastic pipes, conductors and cables. • Dual power ...
RS Pro 2 piece general purpose measuring set, ...
Description:
RS Pro 2 piece general purpose measuring set, precision caliper and micro-meter for accuracy in a wide range of measuring applications. Fully hardened stainless steel construction with an anti-glare, satin chrome finish. All measuring surfaces are ground and lapped for ...
Depth gauge micrometers manufactured to the tolerances required ...
Description:
Depth gauge micrometers manufactured to the tolerances required by BS6468Constant force ratchet-stop and positive locking clampAdjustable to compensate for wearSets include six 3.15mm diameter measuring rods and adjustment spanner.
Heads are manufactured from fully hardened steelBase and ...
Description:
Heads are manufactured from fully hardened steelBase and Top surface are ground for use as a datum faceBase Datum Face: 2 1/2in x 1/8in Top Datum Face: 1in x 1/8inBevelled surface of datum face allows easy reading of ruleRule clamped ...