Weidmuller 2081890000, 30 mA, DIN Rail Mount 24V Electronic Circuit breaker

  • RS-stocknr. 179-2991
  • Fabrikantnummer 2081890000
  • Fabrikant Weidmüller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: SK
Productomschrijving

Efficient machine and facility operation calls for fail-safe and maintenance-friendly control voltage distribution that can be installed in a time and space-saving manner. With the new maxGUARD system, the terminal blocks (previously installed separately) for distributing potential to the outputs of the electronic load monitors become an integral part of a 24 V DC control voltage distribution System. The innovative combination of load monitoring and potential distribution saves time during installation, increases safety against failure and reduces the amount of space required on the terminal rail by 50%.

Specificaties
Kenmerk Waarde
Current Rating 30 mA
Rated DC Voltage 24V
Mounting Style DIN Rail Mount
Length 12.2mm
Width 96.5mm
Depth 125mm
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
36,81
(excl. BTW)
44,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
36,81 €
Related Products
electronic circuit breaker1-channel24 VDC input voltage1 Acommunication capability. ...
Description:
electronic circuit breaker1-channel24 VDC input voltage1 Acommunication capability.
The Wago electronic circuit breaker is a single ...
Description:
The Wago electronic circuit breaker is a single channel circuit breaker with an output current and voltage capacity of 8A and 30VDC. The DIN rail type of mounting is used for this circuit breaker. The status for the operation of ...
ESS20 electronic circuit breaker designed to selectively protect ...
Description:
ESS20 electronic circuit breaker designed to selectively protect individual circuits powered from single switch-mode power supplies (SMPS). Easily added to a DIN/EN rail, the ESS20 provides advanced circuit protection for components used in factory automation systems. Switchable current rating ranges ...
Electronic circuit protector type ESX10-T is designed to ...
Description:
Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current ...