Amber Electrical Tape, 25mm x 33m

  • RS-stocknr. 468-409
  • Fabrikantnummer HB830-25
  • Fabrikant Hi-Bond
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: KR
Productomschrijving

Adhesive Polyimide Tapes

Looking for an electrical insulation tape? Look no further! You can choose a selection of tapes from Hi-Bond with a high-performance film backed by a silicone thermosetting adhesive which will not carbonise at elevated temperatures. The tape is specifically designed for high-temperature exposure where mechanical, electrical and adhesive properties must be maintained.

Benefits:

• No adhesive residue
• Very high temperature resistance of 250 °C
• Temperature resistant
• Easy and clean removal
• Masking terminal on PCB
• For surface protection

Features:

• Carrier: Polyimide
• Colour: Amber
• Thickness Carrier: 25
• Adhesive: Silicone

Typical Applications

These Polyimide Tapes are suitable for the most demanding applications in electronic industries.

• Die-cutting to precise tolerances for masking applications
• Fixing Static laminators
• Membrane switch and keypad applications
• E.M.I. / R.F.I. shielding
• Electrical insulation

Electrical Tapes

For electrical installation and repair work; soldered joints and seams; insulation of soldered joints, terminals, cable sockets and conduction rails.

Specificaties
Kenmerk Waarde
Colour Amber
Width 25mm
Length 33m
Backing Material Polyimide Film
Thickness 0.07mm
Maximum Operating Temperature +260°C
Trade Name HB830
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
191 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
41,33
(excl. BTW)
50,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
41,33 €
6 - 14
39,68 €
15 +
38,86 €
Related Products
Single component systemHigh electrical conductivityFast dryingHighly adherent to ...
Description:
Single component systemHigh electrical conductivityFast dryingHighly adherent to circuit boardsOperating temperature to 400°F (205°C)APPLICATIONS Circuit trace repairSolderless linking of componentsEMI shieldingSolderable terminationsQuick prototype modifications.
Self-adhesive, non-hardening and non-conductive black mass for sealing ...
Description:
Self-adhesive, non-hardening and non-conductive black mass for sealing and insulatingFor modelling, adapts to various formsCan be removed easily and without leaving residueBonds to rubber, plastics, metals, wood, plaster and cement.
Scotch® Rubber Splicing Tape 23 is a highly ...
Description:
Scotch® Rubber Splicing Tape 23 is a highly conformable 0.76 mm thick, self-amalgamating EPR (Ethylene Propylene Rubber) base for rubber splicing. It is designed to splice and terminate cables with overload temperatures of 266 degrees F(130 degree C), due to ...
A non-woven glass cloth with an acrylic adhesive ...
Description:
A non-woven glass cloth with an acrylic adhesive used in electrical insulation of coils, insulation of square conductors in traction motors and generators and tensional strapping of coils and armature windings. Acrylic adhesiveRecognised by ULConforms to BS EN 60454-3-8 Type ...